Setting Device Name - Alvarion BreezeMAX Si 4000 CPE User Manual

Chapter 4 - Configuring Setup Parameters
4.5

Setting Device Name

This page allows you to define a name that identifies your unit. Using an
easy-to-remember name instead of the default one will simplify access to the
unit's GUI Setup menu. You can type the device name, followed by a dot(.) in the
address bar of the Web browser to login from LAN (for example: http://mycpe.).
The Device Name page displays the following information:
Current Device Name - Displays the current name of the unit (Default:

WiMAXCPE)
New Device Name - Enter a new name for your device (up to 20 ASCII

printable characters) and click Apply.
BreezeMAX Si 4000 CPE
Figure 4-4: Setup - Device Name
50
Setting Device Name
User Manual