Alvarion BreezeMAX Si 4000 CPE User Manual page 120

Chapter 9 - Configuring Telephony Parameters
Display Name - Enter a name that will be displayed on the Caller ID Display

Name of the receiving party (if supported by the network)
Call Waiting - Enables suspending the current telephone call and switch to a

new incoming call (Default: Enabled).
Call Waiting Timeout - enter a number of seconds after which the call waiting

is timed out (Default: 30 seconds).
Call Block list - set up the numbers as follows:

»
»
BreezeMAX Si 4000 CPE
Incoming - blocks incoming calls from the listed numbers (up to 50 digits).
Outcoming - blocks outgoing calls from the listed numbers (up to 50
digits).
104
VoIP Parameters
User Manual