Chapter 3 - Commissioning
3.2
Configuring the CPE Using the Web
Management Interface
3.2.1
Accessing the Web Management Interface
By default, the BreezeMAX Si 4000 enables a DHCP server and computers or
network devices connected to a LAN port to automatically get an IP address from
the unit. If the unit's DHCP server is disabled, you can set in the PC the IP
address, netmask, and gateway manually using the following parameters:
IP address: 192.168.254.x (1 < x < 253, excluding 251)
Netmask: 255.255.255.0
Gateway: 192.168.254.251
To log in:
1
Open a web browser and enter the default IP address:
http://192.168.254.251. The web browser displays the login page.
2
Enter the user name and password, and click Login. The default credentials
are:
»
»
BreezeMAX Si 4000 CPE
Figure 3-1: Login Window
Username: admin
Password: admin
Configuring the CPE Using the Web Management Interface
33
User Manual