Setting Basic Parameters - Alvarion BreezeMAX Si 4000 CPE User Manual

Chapter 4 - Configuring Setup Parameters
4.2

Setting Basic Parameters

The Basic Setup allows you to configure the main system parameters.
IMPORTANT
Do not change parameters in this page unless specifically instructed by your service provider. Doing
so may cause your internet/VoIP connection to fail, and you will need to reset the unit to default
parameter values.
The following table describes the configurable Basic parameters:
Parameter
Operation Mode
BreezeMAX Si 4000 CPE
Figure 4-1: Setup - Basic Parameters
Table 4-1: Basic Parameters
Description Default
44
Setting Basic Parameters
Possible Values
User Manual