Chapter 3 - Commissioning
3
Choose the ISP (Internet Service Provider) ConfigFile from the list and click
Next. The Ready To Install window is displayed.
4
Click Install. If your CPE is powered up, click OK for performing system
reboot. If not, power on the CPE and click OK.
The tool starts the auto-configuration process of the unit settings. It will
change default settings by using the *.ipk file, and then run "reset to factory
default" by using default configuration in the file.
BreezeMAX Si 4000 CPE
Configuring the CPE Using the WiMAX Modem Application CD
Figure 3-4: Choose Your ISP Window
Figure 3-5: Ready To Install Window
37
User Manual