Lpt1 (Primary Parallel Port) Connectors; Lpt2 (Secondary Parallel Port) Connector (Cn26); Keyboard/Mouse Connectors (Cn6); Power Connectors (Cn18, Cn12, Fan1, Fan2) - Advantech AIMB-340F series User Manual

Table of Contents

2.10 LPT1 (primary parallel port) connectors (CN5)

The primary parallel printer port is located at the rear edge of the board,

and has a DB-25 connector. This printer port is typically used to connect a

printer via an adapter cable. LPT1's IRQ setting is defined as IRQ7. You

can select Normal/EPP/ECP for LPT1, and enable/disable it in BIOS (see

Chapter 4).

The secondary parallel port is located next to and on the inner side of the

primary parallel port. This secondary port has a 26-pin box header.

LPT2ís IRQ setting is defined as IRQ9. You can select Printer/EPP/ECP/

SPP for LPT2, and enable/disable it in BIOS (see Chapter 4).

The AIMB-340F is uniquely designed to allow 3 ways for keyboard and

mouse input. Please note that only one keyboard and one mouse can be

connected at one time.

• External mini-DIN PS/2 keyboard/mouse jack (CN4)

• External mini-DIN PS/2 mouse/keyboard jack (CN4)

+12V Power Connector (CN12)

There is a 4pin +12V power connector.

The power connection is a 20-pin connector requiring ±5 V and ±12 V

and 5VSB single.

There are two FAN connector provided, FAN2 is system FAN, FAN1 is

optional CPU cooling fan.Only present when +5 V and +12 V power is

supplied to the board.

AIMB-340F User's Manual

Table of Contents