3.7.15 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: "Enabled", "Disabled".
3.7.16 PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: "Enabled", "Disabled".
3.7.17 PWRON After PWR-Fail
Use this to set up the system after power failure. The "Off" will keep the
system powered off after power failure, the "On" will boot up the system
after failure, and the "Former-Sts" will return the system to the status
before power failure.
3.8 PnP/PCI Configurations
3.8.1 Reset Configuration Data
Default is Disabled. Select Enable to reset Extended System Configura-
tion Data (ESCD) if you have installed a new add-on, and system config-
uration has caused such a conflict that OS cannot boot.
3.8.2 Resources Controlled By
The commands here are "Auto(ESCD)" or "Manual." Choosing "Man-
ual" requires you to choose resources from each following sub-menu.
PCA-6009 User Manual
Figure 3.10: PnP/PCI configurations screen
44