Vga Interface Connections; Crt Display Connector (Cn1); Flat Panel Display Connector (Cn13) - Advantech AIMB-340F series User Manual

Table of Contents

COM-5 Select +12V Output step => Change the JP4 Pin-15,16 jumper to

JP3 Pin-19,21

COM-6 Select +5V Output step => Change the JP4 Pin-17,18 jumper to

JP3 Pin-18,20

COM-6 Select +12V Output step => Change the JP4 Pin-17,18 jumper to

JP3 Pin-20,22

2.18 VGA interface connections

The AIMB-340F 's AGP 4X interface can drive conventional CRT dis-

plays and is capable of driving a wide range of flat panel displays, includ-

ing electroluminescent (EL), gas plasma, passive LCD and active LCD

displays. The board has two connectors to support these displays, one for

standard CRT VGA monitors and one for flat panel displays.

CN1 is a standard 15-pin D-SUB connector commonly used for the CRT

VGA monitor only. Pin assignments appear in the appendix.

CN13 consists of a 40-pin header. It can connect to a 2 channel 48-bit

LVDS LCD panel. Pin assignments appear in the appendix. (For more

information on LCD connection information between CN13 and LCD,

refer to Chapter 3.)

AIMB-340F User's Manual

Table of Contents