Advantech AIMB-330F User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. AIMB-330F
  6. User manual
Advantech AIMB-330F User Manual

Advantech AIMB-330F User Manual

Socket 370 sbc for multimedia applications
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AIMB-330F
Socket 370 SBC for Multimedia
Applications
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIMB-330F and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech AIMB-330F

Summary of Contents for Advantech AIMB-330F

  • Page 1 AIMB-330F Socket 370 SBC for Multimedia Applications User’s Manual...
  • Page 2 SMI is a trademark of Silicon Motion, Inc. Creative is a trademark of Creative Technology LTD. All other product names or trademarks are properties of their respective owners. For more information on this and other Advantech products, please visit our websites at: http://www.advantech.com http://www.advantech.com/epc For technical support and service, please visit our support website at: http://service.advantech.com.tw/eservice/...

  • Page 3: Packing List

    • 1 UDMA/66IDE flat cable • 1 startup manual • 1 2-port serial port cable • 1 4-port serial cable (AIMB-330F only) • 1 IEEE 1394 cable (optional) If any of these items are missing or damaged, contact your distributor or...
  • Page 4 Additional Information and Assistance Step 1. Visit the Advantech web site at www.advantech.com where you can find the latest information about the product. Step 2. Contact your distributor, sales representative, or Advantech's cus- tomer service center for technical support if you need additional assistance.

  • Page 5: Safety Instructions

    Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
  • Page 6 Typ. Entsorgung gebrauchter Batterien navh Angaben des Herstellers. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. AIMB-330F User’s Manual...
  • Page 7 Caution! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equiv- alent type recommended by the manufacturer. Dispose of used batteries according to the man- ufacturer’s instructions.
  • Page 8 AIMB-330F User’s Manual viii...

  • Page 9: Table Of Contents

    Content Chapter 1 General Information ........2 Introduction ............... 2 Features ................3 Specifications ..............4 Board Dimensions ............. 6 Figure 1.1:Board Dimensions (Component Side)... 6 Figure 1.2:Board Dimensions (Solder Side)....7 Chapter 2 Installation ............10 Jumpers................10 Connectors............... 10 Locating jumpers and connectors........12 Figure 2.1:Locating Jumpers &...
  • Page 10 2.0mm Pin-header) (JP4)21 2.17 COM1~COM6 Pin-9 voltage output select(JP3) .... 21 2.18 VGA interface connections ..........23 2.18.1 CRT display connector (CN1) ........23 2.18.2 Flat panel display connector (CN13,CN14) ....23 2.18.3 LCD VDDSAFE setting (JP2)........24 2.18.4 Inverter power connector (CN17)......... 24 2.19 Ethernet configuration.............
  • Page 11 Advanced BIOS Features ..........60 Figure 6.3:Advanced BIOS features screen....61 6.4.1 Virus Warning............... 61 6.4.2 CPU Internal Cache ............61 6.4.3 External Cache.............. 61 6.4.4 CPU L2 Cache ECC Checking ........61 6.4.5 Processor Number Feature..........61 6.4.6 Quick Power On Self Test ..........61 6.4.7 First/Second/Third/Other Boot Device......
  • Page 12 Figure 6.10:Power management setup screen....68 6.7.1 Power Management Option .......... 68 6.7.2 HDD Power Down............69 6.7.3 Suspend Mode............... 69 6.7.4 Video Off Option ............69 6.7.5 Video Off Mode............69 6.7.6 Modem Use IRQ............69 6.7.7 Soft-Off by PWR-BTTN ..........69 6.7.8 IRQ/Event Activity ............
  • Page 13 CN3 PCMCIA connector ..........92 CN4 Audio connector............92 CN26 LPT-2 connector 25-pin D-sub......92 CN5 LPT1 D-TYPE 25 Pin connector......93 CN10 Internal speaker(4x1,2.0mm Wafer-box) ..... 93 CN11 CD-Input connector (4x1,2.54 mm Wafer-box) ... 94 C.10 CN12 Reserved to program the Watch-dog ....94 C.11 CN17 Inverter power(5x1,2.0 mm Wafer-box) ....
  • Page 14 AIMB-330 User’s Manual...
  • Page 15 General Information This chapter gives background infor- mation on the AIMB-330F. Sections include: • Sections include: • Introduction • Features • Specifications • Board layout and dimensions...

  • Page 16: Chapter 1 General Information

    AIMB-330F is the new top-of-the-line Industrial Motherboard solution at Advantech. The AIMB-330F is loaded with special on-board features that rival full- size systems. It has standard 10/100Base-T PCI Ethernet, 2 channel 48- bit LVDS LCD panel support as well as SSD support for CompactFlash®.

  • Page 17: Features

    1.2 Features • All-in-one design simplifies system integration and increases system stability • Socket 370 supports Intel® Celeron®/Pentium® III processors(Tul- atin), VGA C3 above 750MHz. • Dual display support • 2/6 serial ports, one RS-232/422/485, the others are RS-232, COM 3~6 shared IRQ •...

  • Page 18: Specifications

    • Supports one 50-pin socket for CompactFlash™ card VGA/LCD interface • Chipset: VGA CLE266 • Display mode: Maximum 3D resolution supported, LCD panel: 1600 x 1200. CRT 1400x1050, DVI 1280x1024 • Dual display combination: CRT +24-bit LCD panel; CRT+ LVDS panel AIMB-330F User’s Manual...
  • Page 19 Ethernet interface • Chipset: ReakTek RTL 8139DL 10/100M or Intel 82541GI (10/100/ 1000M optional) • Ethernet interface: 1 x RJ45 • Connection: On-board RJ-45 connector • Speed: 10/100Base-T or 1000Base-T • Standard: IEEE 802.3, IEEE 802.3u, IEEE 802.3z/ab (optional) • Built-in boot ROM Display •...

  • Page 20: Board Dimensions

    1.4 Board Dimensions Figure 1.1: Board Dimensions (Component Side) AIMB-330F User’s Manual...

  • Page 21: Figure 1.2:Board Dimensions (Solder Side)

    Figure 1.2: Board Dimensions (Solder Side) Chapter 1...
  • Page 22 AIMB-330F User’s Manual...
  • Page 23 Installation This chapter explains how to set up the AIMB-330F hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the instal- lation procedure.

  • Page 24: Chapter 2 Installation

    Chapter 2 Installation 2.1 Jumpers The AIMB-330F has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the board's jumpers Table 2.1: Table 2.1: Jumpers...
  • Page 25 Table 2.2: Connectors CN12 Watch-Dog progarm connector CN13 24-bits LVDS LCD (40-pin) HIROSE CN14 12-bits LVDS LCD (40-pin) HIROSE CN16 Embedded USB-V CN17 Inverter Power Connector CN18 ATX Power connector CN19 DIO connector CN20 Secondary IDE connector CN21 IR Connector CN22 Primary IDE connector CN23...

  • Page 26: Locating Jumpers And Connectors

    2.3 Locating jumpers and connectors Figure 2.1: Locating Jumpers & Connectors AIMB-330F User’s Manual...
  • Page 27 CN28 Figure 2.2: Locating Jumpers & Connectors(soldor side) Chapter 2...

  • Page 28: Setting Jumpers

    A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes. Generally, you simply need a standard cable to make most connections. AIMB-330F User’s Manual...

  • Page 29: Cpu Installation And Upgrading

    2.5.1 Installing a CPU in the ZIF socket AIMB-330F provides a Zero Insertion Force (ZIF) socket for easy CPU installation. Make sure the ZIF socket lever is in the upright position. To raise the lever, pull it out to the side a little and raise it as far as it will go.

  • Page 30: Cmos Clear (Jp1)

    You can install one DDR SDRAM (up to 1 GB) or two 186-pin DIMM (up to 2 GB DRAM) in the DIMM sockets. Caution! When installing DIMM, make sure the module is oriented properly. Do not use excess force during installation. AIMB-330F User’s Manual...

  • Page 31: Primary (3.5") Ide Connector (Cn22)

    2.7 Primary (3.5") IDE connector (CN22) The 40-pin IDE connector supports up to two 40-pin IDE interface devices, including CD-ROM drives, tape-backup drives, HDDs, etc. When connecting, make sure pin 1 of the connector is matched with pin of the device's connector. The built-in Enhanced IDE (Integrated Device Electronics) controller supports up to two IDE devices, including CD-ROM drives, tape backup drives, a large hard disk drive and other IDE devices.

  • Page 32: Fdd Connector (Cn23) (Optional)

    2.9 FDD connector (CN23) (optional) You can attach up to one floppy disk to the AIMB-330F's on-board con- troller. You can use any combination of 5.25" (360 KB and 1.2 MB) and/ or 3.5" (720 KB, 1.44 MB, and 2.88 MB) drives.

  • Page 33: Lpt1 (Primary Parallel Port) Connectors

    SPP for LPT2, and enable/disable it in BIOS (see Chapter 4). 2.12 Keyboard/mouse connectors (CN6) The AIMB-330F is uniquely designed to allow 3 ways for keyboard and mouse input. Please note that only one keyboard and one mouse can be connected at one time.

  • Page 34: Audio Interfaces (Cn4, Cn10, Cn11)

    2.14.3 CD audio-in connector (CN11) All CD-ROM drives can provide analog audio signal output when used as a music CD player. The CN11 on AIMB-330F is a connector to input CD audio signal into the audio controller. The audio cable of your CD-ROM drive will be used to connect to CN11.

  • Page 35: Rs232/422/485 &Com 1-6 Ring Select

    2.16 COM-2 RS232/422/485 &COM 1-6 Ring select (9x2 , 2.0mm Pin-header) (JP4) Pin-1 Pin-2 RxD485 Pin-3 Pin-4 RxD422 Pin-5 Pin-6 RxD232 Pin-7 COM-1 RING# input Pin-8 System RING1# Signal Pin-9 COM-2 RING# input Pin-10 System RING2# Signal Pin-11 COM-3 RING# input Pin-12 System RING3# Signal Pin-13...
  • Page 36 COM-4 Select +5V Output step => Change the JP4 Pin-13,14 jumper to JP3 Pin-10,12 COM-4 Select +12V Output step => Change the JP4 Pin-13,14 jumper to JP3 Pin-12,14 COM-5 Select +5V Output step => Change the JP4 Pin-15,16 jumper to JP3 Pin-17,19 AIMB-330F User’s Manual...

  • Page 37: Vga Interface Connections

    JP3 Pin-20,22 2.18 VGA interface connections The AIMB-330F 's AGP 4X interface can drive conventional CRT dis- plays and is capable of driving a wide range of flat panel displays, includ- ing electroluminescent (EL), gas plasma, passive LCD and active LCD displays.

  • Page 38: Lcd Vddsafe Setting (Jp2)

    2.18.3 LCD VDDSAFE setting (JP2) The AIMB-330F's VGA interface supports 5 V and 3.3 V LCD displays. By changing the setting of JP2, you can select the panel video signal level to be 5 V or 3.3 V. Table 2.3: LCD power (JP2)

  • Page 39: Watchdog Timer Configuration

    2.21 USB connector (CN7,CN9,CN16) The AIMB-330F board provides six USB (Universal Serial Bus) inter- faces which support plug and play and hot attach/detach for up to 127 external devices. The USB interfaces comply with USB specification Rev.

  • Page 40: Digital Output Programming

    ACT, ATX power and Reset LED. The more detail informa- tion can reference appendix. 2.25 COMS Power (JP1) There is a 3pin connector (JP1) for host bus speed select. Table 2.5: -> COMS Power Function Default Clear COMS AIMB-330F User’s Manual...

  • Page 41: Watch Dog Programer (Cn12)

    2.26 Watch Dog programer (CN12). CN12 is reserved for watch dog programming purpose. The pin definita- tion reference appendix, please. 2.27 PCI slot expension (PCI1 or PCI2) The location of PCI1 follow EmbeddedATX specification. And the loca- tion of PCI2 follow MicroATX 2nd PCI slot location. These two PCI slots can not function at the same time.
  • Page 42 AIMB-330F User’s Manual...
  • Page 43 Chipset Software Installation Utility Chapter 3...

  • Page 44: Chapter 3 Chipset Software Installation Utility

    Chapter 3 Chipset Software Installation Utility 3.1 Before you begin To facilitate the installation of the enhanced display device drivers and utility software, you should read the instructions in this chapter carefully before you attempt installation. The device drivers for the AIMB-330 board are located on the software installation CD.

  • Page 45: Installing Via Cle266 The Utility

    • Integrates superior video features. These include filtered sealing of 720 pixel DVD content, and MPEG-2 motion compensation for soft- ware DVD Note: This utility is used for the following versions of Windows system, and it has to be installed before installing all the other drivers: Windows 2000 Windows XP...
  • Page 46 Click “Next” when you see the following message.. Click “Yes” when you see the following message. AIMB-330 User’s Manual...
  • Page 47 Select “Normal Installation”, and click “Next” when you see the following message. Select “VIA PCI IDE Bus Driver”, “AGP Driver[ AGP3.0 sup- ported]”, “VIA INF Driver 1.70a” and click “Next” when you see the following message Chapter 3...
  • Page 48 Select “install VIA PCI IDE Bus Driver”, and click “Next” when you see the following message. Select “install AGP Driver”, and click “Next” when you see the fol- lowing message. AIMB-330 User’s Manual...
  • Page 49 When the following message appears, you can choose to restart your computer now or later. Chapter 3...

  • Page 50: Connections For Standard Lcds

    3.4 Connections for Standard LCDs Table 3.1: LCD connections LG LM150x60 AIMB-330 Pin No. Function Pin No. Function VDDSAFE VDDSAFE Rx0- LVDS_0N Rx0+ LVDS_0P Rx1- LVDS_1N Rx1+ LVDS_1P Rx2- LVDS_2N Rx2+ LVDS_2P RxC- LVDS_C1N RxC+ LVDS_C1P Rx3- LVDS_3N Rx3+ LVDS_3P AIMB-330 User’s Manual...
  • Page 51 Audio Setup The AIMB-330F is equipped with an audio interface that records and plays back CD-quality audio. This chapter provides instructions for installing the software driversincluded on the audio driver diskettes.

  • Page 52: Chapter 4 Audio Setup

    4.2.1 Before you begin Please read the instructions in this chapter carefully before you attempt installation. The audio drivers for the AIMB-330F board are located on the audio driver CD. Run the supplied SETUP program to install the driv- ers; don’t copy the files manually.
  • Page 53 Step 1. Click "Start" and select "Settings". Click "Control Panel" and double-click Multimedia" icon and press " Reinstall Driver..." to do audio driver installation.. Chapter 4...
  • Page 54 Step 2. In the Hardware Update Wizard window, click "Next". Step 3. Click “Continue anyway”. AIMB-330F User’s Manual...

  • Page 55: Windows 2000 Drivers

    Step 4. In the following Hardware Update Wizard window, click "Fin- ish" for Windows to complete audio driver installation. 4.2.3 Windows 2000 drivers Step 1. Click "Start" and select "Settings". Click "Control Panel" and double-click "Multimedia". Chapter 4...
  • Page 56 Step 2. In the Multimedia Properties window, select the "Devices" tab. Then select the "Audio Devices" item, and click "Add...". Step 3. In the Add window, select the "Unlisted..." item and click "OK". AIMB-330F User’s Manual...
  • Page 57 Step 4. When the Install Driver window appears, insert the utility disc into the CD-ROM drive. Type: D:\AIMB\340\Audio\WinNT\ Step 5. When the following message appears, you can choose to restart your computer now or later. Chapter 4...
  • Page 58 AIMB-330F User’s Manual...
  • Page 59 VGA Setup The AIMB-330F features an integrated VGA interface. This chapter provides instructions for installing the VGA drivers from the driver CD included in your package. Chapter 5...

  • Page 60: Chapter 5 Vga Setup

    1400x1050, and DVI up to 1280x1024 • Dual view capability where CRT and Flat Panel Monitor can have a dif- ferent resolution and refresh rate 5.2 Windows XP Installation Note: Press “CRTL-Alt-F1” hotkey to enable CRT mode in Windows 98 AIMB-330F User’s Manual...
  • Page 61 Insert the driver CD into your system's CD-ROM drive. In a few seconds, the cd main menu appears. Move to "\\AIMB-330\VGA And click "win2k_xpm113" icon or "winnt4m113" icon. "win2k_xpm133" icon is for WIN9x, WIN2000, WINMe, WINXp and "winnt4m133" icon is for WINNT4.x operating system. installation procedure is for Windows 2000.
  • Page 62 You will see a welcome window. Please chick on "Next" to con- tinue the installation. Click "Next" when you see the following message. AIMB-330F User’s Manual...
  • Page 63 VGA driver is now installing. When the following message appears, you can choose to restart the computer now or later Chapter 5...

  • Page 64: Installation For Windows 2000

    5.3 Installation for Windows 2000 Note: Service Pack X (X = 3, 4, 5, 6,...) must be installed first, before you install the Windows 2000 VGA driver. Select "Start", "Settings", "Control Panel" and double click the "Display" icon. AIMB-330F User’s Manual...
  • Page 65 You will see a welcome window. Please click on “Next “ to con- tinue the installation.. Press the "Next" button when you see the following message.. Chapter 5...

  • Page 66: Dual Display Setting

    When the following message appears, you can choose to restart the computer now or later.. 5.4 Dual Display Setting Select “Start”, “Setting”, “Control Panel” and double click the “Display” icon. AIMB-330F User’s Manual...
  • Page 67 Select dual display device type and click “Ok”. Choose “Setting “ tab. Chapter 5...
  • Page 68 Press the Display, select “2” Disable “Extend my Windows destop on this monitor”, and press the “Apply” button.. AIMB-330F User’s Manual...
  • Page 69 Select “Extend my Windows destop on this monitor”, and then press “OK”. Chapter 5...
  • Page 70 AIMB-330F User’s Manual...
  • Page 71 Award BIOS Setup Chapter 6...

  • Page 72: Chapter 6 Award Bios Setup

    "CMOS checksum error..." display screen mes- sage appearing. Then enter the "Setup" screen to modify the data. If the "CMOS checksum error..."message appears again and again, please check to see if you need to replace the battery in your system. AIMB-330F User’s Manual...

  • Page 73: Entering Setup

    6.2 Entering Setup Turn on the computer and check for the “patch code”. If there is a number assigned to the patch code, it means that the BIOS supports your CPU. If there is no number assigned to the patch code, please contact Advan- tech’s applications engineer to obtain an up-to-date patch code file.

  • Page 74: Standard Cmos Setup

    The “Advanced BIOS Features(Figure5.3)” screen appears when choos- ing the “Advanced BIOS Features” item from the “Initial Setup Screen” menu. It allows the user to configure the AIMB-330F according to his particular requirements. Below are some major items that are provided in the Advanced BIOS Features screen.

  • Page 75: Virus Warning

    Figure 6.3: Advanced BIOS features screen 6.4.1 Virus Warning If enabled, a warning message and alarm beep activates if someone attempts to write here. The commands are “Enabled” or “Disabled.” 6.4.2 CPU Internal Cache Enabling this feature speeds up memory access. The commands are “Enabled”...

  • Page 76: First/Second/Third/Other Boot Device

    This setting determines whether the system will boot up if the password is denied. Access to Setup is always limited. System The system will not boot, and access to Setup will be denied if the correct password is not entered at the prompt. AIMB-330F User’s Manual...

  • Page 77: Apic Mode

    Setup The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt. Note: To disable security, select “PASSWORD SET- TING” in the main menu. At this point, you will be asked to enter a password. Simply press <Enter>...

  • Page 78: Memory Hole

    The determines VGA share memory size. The choices: 16, 32, 64MB. 6.5.8 Select Display Device The determines Display Device Type. The choices: CRT, LCD, CRT+LCD, DVI, CRT+DVI. Figure 6.5: Slect Display Device 6.5.9 Panel Type The determines panel type. The choices: 640x480, 800x600, 1024x768. AIMB-330F User’s Manual...

  • Page 79: Integrated Peripherals

    6.6 Integrated Peripherals Figure 6.6: Integrated peripherals 6.6.1 VIA Onchip IDE Device IDE Primary (Secondary) Master/Slave PIO/UDMA Mode (Auto) Each channel (Primary and Secondary) has both a master and a slave, making four IDE devices possible. Because each IDE device may have a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent.

  • Page 80: Via Onchip Pci Device

    Leave IDE HDD Block Mode on the default setting. Figure 6.7: VIA Onchip IDE Device 6.6.2 VIA Onchip PCI Device Select VIA Onchip PCI Device item and press “enter”. setting VIA Onchip function. The commands are “Enabled” or “Disabled”. Figure 6.8: VIA Onchip PCI Device AIMB-330F User’s Manual...

  • Page 81: Super I/O Device

    6.6.3 Super I/O Device Select Enabled if your system contains a Universal Serial Bus (USB) con- troller and you have USB peripherals. The choices: Enabled, Disabled. Select Super I/O Device and press “enter”, setting super I/O feature. Figure 6.9: Super I/O Device 6.6.4 Init Display First This item allows you to choose which one to activate first, PCI Slot or on- chip VGA.

  • Page 82: Power Management Setup

    There are four selections for Power Management, three of which have fixed mode settings. Min. Power Saving Minimum power management., Suspend Mode = 1 hr., and HDD Power Down = 15 min. AIMB-330F User’s Manual...

  • Page 83: Hdd Power Down

    Max. Power Saving Maximum power management., Suspend Mode = 1 min., and HDD Power Down = 1 min. User Defined Allows you to set each mode individually. When not dis- (Default) abled, each of the ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges from 1 min.

  • Page 84: Irq/Event Activity

    Figure 6.11: IRQ/Event Activity 6.8 PnP/PCI Configurations 6.8.1 PnP OS Installed Select Yes if you are using a plug and play capable operating system. Select No if you need the BIOS to configure non-boot device Figure 6.12: PnP/PCI configurations screen AIMB-330F User’s Manual...

  • Page 85: Reset Configuration Data

    6.8.2 Reset Configuration Data Default is Disable. Select Enable to reset Extended System Configura- tion Data (ESCD) if you have installed a new add-on and system econfig- uration has caused such a conflict that OS cannot boot. 6.8.3 Resources controlled by: The commands here are “Auto”...

  • Page 86: Shut Dowm Temperature

    If the CMOS is good or if this option has been used to change the default password, the user is asked for the password stored in the CMOS. The screen will display the following message: Please Confirm Your Password AIMB-330F User’s Manual...

  • Page 87: Save & Exit Setup

    Enter the current password and press <Enter>. After pressing <Enter> (ROM password) or the current password (user-defined), you can change the password stored in the CMOS. The password must be no longer than eight (8) characters. Remember, to enable the password setting feature, you must first select either “Setup”...

  • Page 88: Exit Without Saving

    6.12 Exit Without Saving Selecting this option and pressing <Enter> lets you exit the setup program without recording any new values or changing old ones. Figure 6.16: Exit Without Saving AIMB-330F User’s Manual...

  • Page 89: Lan Configuration

    LAN Configuration • Introduction • Features • Installation of Ethernet Driver for - Windows 2000 Drivers Setup Steps - Windows NT Drivers Setup Steps -Windows Wake-on-LAN Setup Chapter 7...

  • Page 90: Chapter 7 Pci Bus Ethernet Interface

    7.3 Installation of Ethernet Driver Before installing the Ethernet driver, note the procedures below. You must know which operating system you are using in your AIMB-330F, and then refer to the corresponding installation procedure. Then just fol- low the steps described. You will quickly and successfully complete the installation, even if you are not familiar with instructions for Windows.

  • Page 91: Installation For Windows 2000

    7.3.1 Installation for Windows 2000 Note: The CD-ROM drive is designated as"D" throughout this section. Click "Setup" icon in path "D:\AIMB\330\LAN\RTL8139D" Chapter 7...
  • Page 92 Click "Next" to go next step. Then this menu will show on the screen. And click “Finish” to fin- ish the install network driver process. AIMB-330F User’s Manual...

  • Page 93: Installation For Windows Xp

    7.3.2 Installation for Windows XP 1. Click “Setup” icon in path “D:\\AIMB\330\LAN\RTL8139D”.. Chapter 7...

  • Page 94: Further Information

    2. Then this menu will show on the screen. And click "Finish" to finish the install network driver process. 7.4 Further information Realtek website: www.realtek.com VIA website: www.via.com.tw Advantech websites:www.advantech.com www.advantech.com.tw AIMB-330F User’s Manual...

  • Page 95: Watchdog Timer

    Programming the Watchdog Timer The AIMB-330F is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for whatever rea- son. This feature ensures system reli- ability in industrial standalone or...

  • Page 96: Appendix A Programming The Watchdog Timer

    MOV AL,07H ; point to Logical Device Number Reg. OUT DX,AL MOV DX,2FH MOV AL,08H ; select logical device 8 OUT DX,AL MOV DX,2EH MOV AL,30H ;Set watch dog activate or inactivate OUT DX,AL MOV DX,2FH MOV AL,01H ; 01:activate 00:inactivate OUT DX,AL AIMB-330F User’s Manual...
  • Page 97 MOV DX,2EH MOV AL,F5H ; Setting counter unit is second OUT DX,AL MOV DX,2FH MOV AL,00H OUT DX,AL MOV DX,2EH MOV AL,F6H OUT DX,AL MOV DX,2FH MOV AL,05H ; Set 5 seconds OUT DX,AL ;------------------------------------------ ; Exit extended function mode | ;------------------------------------------ MOV DX,2EH MOV AL,AAH...
  • Page 98 AIMB-330F User’s Manual...
  • Page 99 Sample Code of GPIO programming...

  • Page 100: Appendix B Sample Code Of Gpio Programming

    MOV AL,07H ; point to Logical Device Number Reg. OUT DX,AL MOV DX,2FH MOV AL,07H ; select logical device 7 OUT DX,AL MOV DX,2EH MOV AL,F0 OUT DX,AL MOV DX,2FH MOV AL,00H ; 01:Input 00:output for GP10~GP17 OUT DX,AL MOV DX,2EH MOV AL,F2H ; AIMB-330F User’s Manual...
  • Page 101 OUT DX,AL MOV DX,2FH MOV AL,00H ;Set GPIO is normal not inverter OUT DX,AL MOV DX,2EH MOV AL,F1H OUT DX,AL MOV DX,2FH MOV AL,??H ; Put the output value into AL OUT DX,AL ;------------------------------------------ ; Exit extended function mode | ;------------------------------------------ MOV DX,2EH MOV AL,AAH...
  • Page 102 AIMB-330F User’s Manual...
  • Page 103 Connector Definition and Jumper Settings...

  • Page 104: Appendix C Aimb-330 Jumper And Connector Settings

    ATX Power connector CN19 DIO connector CN20 Secondary IDE connector CN21 IR Connector CN22 Primary IDE connector CN23 Floppy connector CN24 Front panel connector CN25 COM3-COM6 RS232 connector CN26 LPT-2 connector CN27 COM-2 RS232 connector CN28 Mini PCI AIMB-330F User’s Manual...

  • Page 105: Cn1 Vga D-Type 15 Pins Connector

    Table C.1: Connectors CN29 Compact Flash (IDE Secondary Slave) CN30, IEEE-1394 CN31 IEEE-1394 CN33 DVI connector FAN1 FAN connector(Speed Detect) FAN2 FAN2 connector(Speed Detect) C.2 CN1 VGA D-TYPE 15 Pins connector signal signal SMB DATA HSYNC VSYNC SMB CLK C.3 CN2 COM1 D-TYPE 9 Pins connect signal signal RI &...

  • Page 106: Aimb-330 User's Manual

    C.5 CN4 Audio connector signal signal HP_OUT_L HP_OUT_R LINE_IN_L LINE_IN_R C.6 CN26 LPT-2 connector 25-pin D-sub signal signal STROBE- AUTO FEED- DATA0 ERROR DATA1 INIT- DATA2 SLCT IN- DATA3 DATA4 DATA5 DATA6 DATA7 ACK- BUSY Paper Empty SELECT AIMB-330F User’s Manual...

  • Page 107: Cn5 Lpt1 D-Type 25 Pin Connector

    C.7 CN5 LPT1 D-TYPE 25 Pin connector signal signal INIT SLIN BUSY SLCT C.8 CN10 Internal speaker(4x1,2.0mm Wafer-box) signal OUT_A- OUT_A+ OUT_B- OUT_B+ Appendix C...

  • Page 108: Cn11 Cd-Input Connector (4X1,2.54 Mm Wafer-Box)

    Pin-3 CD_GND Pin-4 CD_R C.10 CN12 Reserved to program the Watch-dog signal Pin-1 +3.3V Pin-2 Pin-3 W_TDI Pin-4 W_TMS Pin-5 W_TCK Pin-6 W_TDO C.11 CN17 Inverter power(5x1,2.0 mm Wafer-box) signal Pin-1 +12V Pin-2 Pin-3 Enable Pin-4 Pin-5 AIMB-330F User’s Manual...

  • Page 109: Cn13 24-Bit Lvds (20X2, Df13 Connector)

    C.12 CN13 24-bit LVDS (20X2, DF13 connector) signal signal Pin-1 VDDSAFE (Select by Pin-2 VDDSAFE (Select JP5) by JP5) Pin-3 => Pin-4 Pin-5 VDDSAFE (Select by Pin-6 VDDSAFE (Select JP5) by JP5) Pin-7 LVDS_0N Pin-8 LVDS_4N Pin-9 LVDS_0P Pin-10 LVDS_4P Pin-11 Pin-12 Pin-13...

  • Page 110: Cn14 12-Bit Lvds

    OD2- Pin-20 ED2- Pin-21 OD2+ Pin-22 ED2+ Pin-23 Pin-24 Pin-25 OCK- Pin-26 ECK- Pin-27 OCK+ Pin-28 ECK+ Pin-29 Pin-30 Pin-31 DDC_CLK Pin-32 DDC_DAT Pin-33 Pin-34 Pin-35 OD3- Pin-36 ED3- Pin-37 OD3+ Pin-38 ED3+ Pin-39 HPLG Pin-40 VCON AIMB-330F User’s Manual...

  • Page 111: Cn16 Embedded Usb (9X2,2.54 Mm Pin-Header)

    C.14 CN16 Embedded USB (9x2,2.54 mm Pin-header) signal signal Pin-1 Pin-2 Pin-3 Pin-4 Pin-5 Pin-6 Pin-7 USB4_D- Pin-8 USB5_D- Pin-9 USB4_D+ Pin-10 USB5_D+ Pin-11 Pin-12 Pin-13 No Pin Pin-14 Pin-15 Pin-16 +3.3V Pin-17 Pin-18 C.15 CN18 ATX Power connector (10x2,ATX) signal signal Pin-1...

  • Page 112: Cn19 Dio Connector(8X2,2.54Mm Pin-Header)

    Pin-3 Pin-4 Pin-5 Pin-6 Pin-7 Pin-8 Pin-9 Pin-10 Pin-11 Pin-12 Pin-13 Pin-14 Pin-15 Pin-16 Pin-17 Pin-18 Pin-19 Pin-20 Key (No pin) Pin-21 DREQ# Pin-22 Pin-23 IOW# Pin-24 Pin-25 IOR# Pin-26 Pin-27 IORDY Pin-28 CSEL Pin-29 DACK# Pin-30 AIMB-330F User’s Manual...

  • Page 113: Cn21 Irda Connector(5X1,2.54Mm Pin-Header)

    Pin-31 Pin-32 Pin-33 Pin-34 P66 Detect Pin-35 Pin-36 Pin-37 CS0# Pin-38 CS1# Pin-39 HDD-LED# Pin-40 Pin-41 Pin-42 Pin-43 Pin-44 C.18 CN21 IrDA Connector(5x1,2.54mm Pin-header) signal Pin-1 Pin-2 CIRRX Pin-3 IRRX Pin-4 Pin-5 IRTX Appendix C...

  • Page 114: Cn22 Primary Ide(20X2 , 2.54Mm Box-Header)

    Pin-18 Pin-19 Pin-20 Key (No pin) Pin-21 DREQ# Pin-22 Pin-23 IOW# Pin-24 Pin-25 IOR# Pin-26 Pin-27 IORDY Pin-28 CSEL Pin-29 DACK# Pin-30 Pin-31 Pin-32 Pin-33 Pin-34 P66 Detect Pin-35 Pin-36 Pin-37 CS0# Pin-38 CS1# Pin-39 HDD-LED# Pin-40 AIMB-330F User’s Manual...

  • Page 115: Cn23 Floppy(26 Pin Fdc Connector)(Optional)

    C.20 CN23 Floppy(26 Pin FDC connector)(optional) signal Pin-1 Pin-2 INDEX# Pin-3 Pin-4 DSA# Pin-5 Pin-6 DSKCHG# Pin-7 Pin-8 Pin-9 Pin-10 MOA# Pin-11 Pin-12 DIR# Pin-13 Pin-14 STEP# Pin-15 Pin-16 Pin-17 Pin-18 Pin-19 Pin-20 TRACK0# Pin-21 Pin-22 Pin-23 Pin-24 RDATA# Pin-25 Pin-26 HEAD# Appendix C...

  • Page 116: Cn24 Front Panel Connector

    Pin-26 COM5 CTS Pin-27 COM5 DTR Pin-28 COM5 RI Pin-29 Pin-30 Pin-31 COM6 DCD Pin-32 COM6 DSR Pin-33 COM6 RxD Pin-34 COM6 RTS Pin-35 COM6 TxD Pin-36 COM6 CTS Pin-37 COM6 DTR Pin-38 COM6 RI Pin-39 Pin-40 AIMB-330F User’s Manual...

  • Page 117: Cn27 Com-2(7X2,2.0Mm Box-Header)

    C.23 CN27 COM-2(7x2,2.0mm Box-header) signal signal Pin-1 Pin-2 Pin-3 Pin-4 Pin-5 Pin-6 Pin-7 Pin-8 Pin-9 Pin-10 PGND Pin-11 422/485 TxD+ Pin-12 422/485 TxD- Pin-13 422 RxD+ Pin-14 422 RxD- C.24 CN6 K/B & M/S Connector signal signal Pin-1 KB_DATA Pin-2 Pin-3 Pin-4 Pin-5...

  • Page 118: Cn8 Lcd 40-Pin Hirose

    PD12(G2) Pin-22 PD13(G3) Pin-23 PD14(G4) Pin-24 PD15(G5) Pin-25 PD16 Pin-26 PD17 Pin-27 PD18(R0) Pin-28 PD19(R1) Pin-29 PD20(R2) Pin-30 PD21(R3) Pin-31 PD22(R)4 Pin-32 PD23(R5) Pin-33 Pin-34 Pin-35 SHFCLK Pin-36 FLM(V-SYNC) Pin-37 M/(DE) Pin-38 LP(H-SYNC) Pin-39 ENABKL Pin-40 ENVEE AIMB-330F User’s Manual...

  • Page 119: Cn9 Lan+Usb*2 Connector

    C.27 CN9 LAN+USB*2 Connector signal signal Pin-1 Pin-2 Pin-3 Pin-4 Pin-5 Pin-6 Pin-7 Pin-8 Pin-9 Pin-10 Pin-11 VCC_LAN Pin-12 ACTLED Pin-13 VCC_LAN Pin-14 LILED Pin-15 VCCUSB1 Pin-16 DT1- Pin-17 DT1+ Pin-18 GND1 Pin-19 VCCUSB1 Pin-20 DT1- Pin-21 DT1+ Pin-22 GND1 Pin-23 VCCUSB2 Pin-24...

  • Page 120: Cn33 Dvi

    C.33 FAN2 System FAN (3x1,2.54 mm Molex) signal Pin-1 Pin-2 +12V Pin-3 Speed detect C.34 JP1 COMS Power(3x1,2.0 mm Pin-header) function Default Clear COMS C.35 JP5 LVDS VDDSAFE sel.(3x1,2.0 mm Pin-header) signal Pin-1 Pin-2 VDDSAFE Pin-3 +3.3V Default Pin-2,3 short AIMB-330F User’s Manual...

  • Page 121: Jp3 Com1-6 Pin-9 V Out (11X2,2.0Mm Pin-Header)

    C.36 JP3 COM1-6 Pin-9 V out (11x2,2.0mm Pin-header) signal signal Pin-1 Pin-2 Pin-3 COM1-RI Pin-4 COM2-RI Pin-5 +12V Pin-6 +12V Pin-7 Pin-8 Pin-9 Pin-10 Pin-11 COM3-RI Pin-12 COM4-RI Pin-13 +12V Pin-14 +12V Pin-15 Pin-16 Pin-17 Pin-18 Pin-19 COM5-RI Pin-20 COM6-RI Pin-21 +12V Pin-22...

  • Page 122: C.37 Jp4 Com-2 Rs232/422/485 And Com-1 To Com-6 Ring

    Pin-1,2 COM-1 RING# signal select Pin-7,8 (Defalut) COM-2 RING# signal select Pin-9,10 (Defalut) COM-3 RING# signal select Pin-11,12 (Defalut) COM-4 RING# signal select Pin-13,14 (Defalut) COM-5 RING# signal select Pin-15,16 (Defalut) COM-6 RING# signal select Pin-17,18 (Defalut) AIMB-330F User’s Manual...
  • Page 123 IRQ Resource Table...

  • Page 124: Appendix D Irq Resources

    Bridge IRQ 3: COM2 IRQ 4: COM1 IRQ 5: COM3~COM6 share or Printer 2 IRQ6: IRQ7: Printer 1 IRQ8: IRTC IRQ9: ACPI IRQ10: ICOM 3~COM6 share IRQ11: IRQ12: PS2/Mouse IRQ13: Core Processor IRQ14: IRQ 15: IDE (CD_ROM) AIMB-330F User’s Manual...

Table of Contents