Troubleshooting - Panasonic SD-PT1000 Operating Instructions Manual

Table of Contents

Advertisement

Troubleshooting

When the following
conditions happen
Key operation is
disabled
Press
(Start)
but no operation
(No kneading)
Instant dry yeast
is not dispensed.
Raisins and nuts
cannot be added.
Operation stops
midway
(Display current time)
[Timer setting examples]
Timer cannot be
set.
Start kneading
immediately after
timer setting.
The following sounds are normal.
Sounds are heard
during operation
and timing
Stops halfway
(Blade does not work)
* Please consult Panasonic customer service centre.
Causes
Power plug is not plug in.
"Rice flour" function starts only from
beginning.
Timing for automatically adding instant dry yeast depends on the room temperature
and menu you have selected.
Yeast dispenser is damp or has static
electricity.
Is the instant dry yeast dampened?
Are the ingredients piled up
Operation will be stopped if power fails for
more than 10 min.
Is the time you want to set beyond the timer
range?
The timer needed to complete baking varies
by menu.
Menu: bread
Current time: 08:30 p.m.
(LCD screen displays 20:30)
Scope of time settings: 00:40 a.m. to 09:30
a.m.
("0:40"
"9:30")
* It is impossible to set the time beyond
the range above.
For the breads Pain de mie (super soft French bread), Rice bread, French bread and the
Whole wheat bread functions that use instant dry yeasts, only the initial
procedure will be started immediately after timer setting. (P. 92)
When dough kneading, air discharge or mochi making are going on,
the sounds of kneading are heard.
the sounds of motor running are heard.
the sounds of mochi making are heard.
When instant dry yeast and the ingredients of the raisin and nut dispenser are added
into the bread pan.
the sounds of opening the flap valve and the dispenser flap are heard.
Since too many ingredients were added or the blade is stuck on the hard ingredients,
the motor is overloaded and the protective function is hence activated, which may
cause operation to stop immediately.
(Powder still remains upon completion and baking does not happen)
Please confirm the following issues first.
If any anomaly is still identified, please
contact Panasonic customer service
centre immediately.
Solutions
Plug in the power plug.
(Soak). Kneading doesn't operate in the very
Wipe with a wrung cloth and air dry.
Use new instant dry yeast.
Spread the ingredients flat.
The dough can be used again if the
operation stops in a dough state.
(P. 156)
Please make the setting within the
following range:
Starting from the current time
Bread
After 4 hours and 10 min
Pain de mie (super soft French bread)
After 5 hours
13 h
Soft bread
After 4 hours and 30 min
Rice bread
After 4 hours and 10 min
French bread
After 5 hours and 10 min
Whole wheat bread
After 5 hours and 10 min
Rice flour bread
After 2 hours and 40 min
Natural yeast bread
After 7 hours and 10 min
13 h
13 h
13 h
13 h
13 h
13 h
10 h
(kneading)
163

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents