Table of Contents
Advertisement
VM3404H / VM3909H User Manual
Scaling Command
The Scaling command allows you to set a resolution for scaling the display
connected to an output port.
The formula for the Scaling command is as follows:
Command + Output + Number + Address + Number + Horizontal
resolution + Number + Vertical Resolution + Number + [Enter]
1. For example, to turn scaling off for output port 02, type:
scaling o02 off [Enter]
2. To set the scaling for output port 04 to 1920x1080@60Hz, type:
scaling o04 1080p [Enter]
3. To set the scaling for all output ports to the connected display's native
resolution, type:
scaling o* native [Enter]
The following tables show the possible values for the Scaling command:
Command
Output Command
Port Number
Control
84
scaling
Scaling command
o
Output command
yy
01-09 port
*
All output ports
off
Turn off the scaling function
(by pass mode)
native
Map display's native resolution for
scaling (default)
1080p
Scale to 1920x1080@60Hz
720p
Scale to 1280x720@60Hz
1920
Scale to 1920x1200@60Hz
1800
Scale to 1800x1200@60Hz
1400
Scale to 1400x1050@60Hz
1280
Scale to 1280x1024@60Hz
Description
Description
Description
Description
Advertisement
Table of Contents
