VM5404H / VM5808H User Manual EMC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
VM5404H / VM5808H User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.com Telephone Support For telephone support, call this number: International 886-2-8692-6959 China 86-10-5255-0110 Japan 81-3-5615-5811 Korea 82-2-467-6789 North America...
Manual Date: 2015-09-09 VM5404H Firmware Version: V1.0.076 VM5808H Firmware Version: V1.3.126 ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other brand names and trademarks are the registered property of their respective owners.
VM5404H / VM5808H User Manual About this Manual This User Manual is provided to help you get the most from your VM5404H / VM5808H system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below.
For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers: International http://www.aten.com...
Introduction Overview The ATEN VanCryst VM5404H / VM5808H 4 x 4 / 8 x 8 HDMI Matrix Switch with Scaler is a versatile solution that provides an easy way to route high definition video and audio from any of 4/8 HDMI sources to any of 4/8 HDMI displays at the same time.
VM5404H / VM5808H User Manual Features Connects up to 4 (VM5404H) or 8 (VM5808H) HDMI sources to any of 4/ 8 HDMI displays Long Distance Transmission – supports up to 15 m (24 AWG) HDMI (3D, Deep color); HDCP 1.2 compatible Video wall –...
Chapter 1. Introduction Requirements The following devices are required for a complete VM5404H / VM5808H installation: Source Devices Computer or A/V source device with HDMI Type A output connector(s) Note: A DVI/HDMI adapter is required when connecting a DVI source device.
VM5404H / VM5808H User Manual Source Device Operating Systems Supported operating systems are shown in the table below: Version Windows 2000 and higher Linux RedHat 6.0 and higher SuSE 8.2 and higher Mandriva (Mandrake) 9.0 and higher UNIX 4.3 and higher FreeBSD 3.51 and higher...
Main Screen, page 17. Input Pushbuttons These pushbuttons refer to the HDMI Input ports found on the VM5404H rear panel. Press to select the Input port. These pushbuttons may also correspond to menu options, connection profiles (P1–P4) and so on.
Ethernet Port In order to access the VM5404H’s Browser Graphical User Interface (GUI), the VM5404H must be connected to your network. The cable that connects the VM5404H to your LAN plugs in here. See Cable Connection, page 13, for further details...
Chapter 1. Introduction VM5808H Front View Component Description LCD Display The LCD Display gives a quick view of all port connections, and shows the various options for configuring and operating the VM5808H. For full details, see Main Screen, page 17. Input Pushbuttons These pushbuttons refer to the HDMI Input ports found on the VM5808H rear panel.
VM5404H / VM5808H User Manual VM5808H Rear View Component Description Power Socket This is a standard 3-pin AC power socket. The power cord from an AC source plugs in here. Power Switch This is a standard rocker switch that powers the unit on and off.
Press Input source pushbuttons 1–8 to select the Input source you want to display on a selected output 1–8 (see IR Remote Control Operation, page 33). The VM5404H's IR remote control only supports use the 1~4 Input and Note: 1~4 Output pushbuttons.
Page 20
VM5404H / VM5808H User Manual This Page Intentionally Left Blank...