Table of Contents
Advertisement
2. Press pushbuttons 1–4 to make your selection.
1: Port 1
2: Default (In use)
EDID Mode options are:
EDID Option
1: Port1
2: Default
3: Remix
4: Customized Automatically retrieves and saves the EDID settings of a
3. Press Menu to return to the Menu page.
4. Press Cancel to return to the previous step without saving.
CEC
To configure the CEC setting, do the following:
1. From the Operation Mode page, press pushbutton 2:
1: EDID Mode
2: CEC
2. Press pushbuttons (1–9) or (1–4) to enable (ON) or disable (NA) the CEC
feature for the output port. If the port does not support CEC, an NA is
shown.
OUTPUT 1 2 3 4
Note: The default CEC setting is NA.
3. Press Menu to return to the Menu page.
4. Press Cancel to return to the previous step without saving.
3: Remix
4: Customized
The EDID from port1 is passed to all video sources.
The default EDID is passed to all video sources.
Uses the EDID of each connected display according to its
connection when the VM3404H / VM3909H is first powered on,
or immediately after pressing 3 to select the Remix option.
connected monitor/display device to an input source port. This
can be configured using the Browser GUI. See Customized
EDID Settings, page 67.
Next
NA ON ON NA
Chapter 3. Front Panel Configuration
Description
27
Advertisement
Table of Contents
