Table of Contents
Advertisement
LCD Menu Organization
The VM3404H / VM3909H has a built-in configuration utility via the front
panel LCD, which can be controlled by pressing the MENU and front panel
Input pushbuttons (1–9) or (1–4). User can cycle through the menu options,
starting from IP Setting page, in the order shown in the table below:
Menu Page
IP Setting
Serial Port Setting
Operation Mode
Security Mode
Save to a Profile
Play/Stop the Profile Schedule
Note: The highlighted values are the default settings of the VM3404H /
VM3909H.
Menu Pushbutton
Press the MENU pushbutton to switch between the Main Screen and LCD
Menu page. When the Menu is active, the MENU pushbutton's built-in LED
lights up:
1: IP Setting
2: Serial Port Setting
From the Menu page:
Press 1 to go to the IP Setting page (see IP Setting, page 24)
Press 2 to go to the Serial Port Setting page (see Serial Port Setting,
page 25)
IP Address
Subnet Mask
Gateway
Baud Rate
EDID
CEC
OSD
Output Status
Password
Change Password
Save to a Profile No.
Next
Chapter 3. Front Panel Configuration
Sub-Menu Page(s)
9600 / 19200 / 38400 / 115200
Default / Port1 / Remix / Customized
On / NA
On / NA
On / NA
Enable / Disable
Old Password
New Password
01–08 (VM3404H); 01-18 (VM3909H)
23
Advertisement
Table of Contents
