Serial Port Setting; Baud Rate - ATEN VM3404H User Manual

Serial Port Setting

To configure the VM3404H / VM3909H's baud rate for its serial port
connection, select Serial Port Setting from the Menu page.
1: IP Setting

2: Serial Port Setting

Baud Rate

To set the VM3404H / VM3909H's baud rate, do the following:
1. Select Baud Rate Setting from the Serial Port Setting submenu by
pressing 1:
1: Baud Rate Setting
2. Press pushbuttons 1–4 to make your selection.
1: 9600
2: 19200 (In use)
Baud Rate options are:
1: 9600
2: 19200
3: 38400
4: 115200
Note: The default baud rate is 19200.
3. Press Menu to return to the Menu page.
4. Press Cancel to return to the previous step without saving.
Next
3: 38400
4: 115200
Chapter 3. Front Panel Configuration
25