Edid Mode Command - ATEN VM3404H User Manual

EDID Mode Command

Extended Display Identification Data (EDID) is a data that contains a display's
basic information and is used to communicate with the video source.
The formula for the EDID command is as follows:
Command + Control + [Enter]
1. For example, to use the Port1 EDID mode, type:
edid port1 [enter]
The following tables show the possible values for the EDID command:
Command
Control
Note: Each command string can be separated with a space.
The following table lists the available EDID commands:
Command Control
edid port1
edid remix
edid default
edid

EDID Mode command

port1 Implement the EDID of the connected
display to Port 1, and pass it to the
video source.
remix Implement the EDID of each
connected display according to its
connection when the VM3404H /
VM3909H is first powered on, or
immediately after selecting the Remix
option.
default Implements ATEN's default EDID.
(default)
custom Implements the customized mode as
set in the EDID system settings.
(See Customized EDID Settings,
page 67)
Enter
[Enter] The EDID from Port 1 is passed to the video
source.
[Enter] The VM3404H / VM3909H implements the
EDID of each connected display according to
its connection when the VM3404H / VM3909H
is first powered on, or immediately after
selecting the Remix option.
[Enter] ATEN's default EDID is passed to the video
source.
Chapter 5. RS-232 Commands
Description
Description
Description
81