Crankcase Separation; Transmission Removal - Suzuki RM-Z250 Owner's Service Manual
Hide thumbs
Also See for RM-Z250:
- Owner's manual (219 pages) ,
- Owner's service manual (329 pages) ,
- Service manual (411 pages)
Table of Contents
Advertisement
10-4
TRANSMISSION AND CRANKSHAFT
CRANKCASE SEPARATION
• Remove the engine sprocket spacer 1 and two O-rings 2.
• Remove the oil strainer cap 3 and oil strainer (Feed pump
side). (!2-14)
• Separate the crankcase with the special tool.
" 09920-13120: Crankcase separating tool
NOTE:
* Set the crankcase separating tool to the clutch side of the
crankcase.
* Separate the crankcase gradually while hitting the crankcase
boss and countershaft softly with a plastic hammer.
TRANSMISSION REMOVAL
• Remove the dowel pins 1 and gasket 2.
• Remove the oil strainer (Scavenge pump side) 3.
Advertisement
Chapters
Table of Contents
