Suzuki RM-Z250 Owner's Service Manual page 262

• With the outer tube compressed by hands, remove the special
tool.
Removing the lock-nut 4 and pushing the inner rod
thread into the damper rod will damage the inner rod
oil seal.
Do not remove the lock-nut 4 from the inner rod.
• Loosen the fork cap bolt 1 (sub-tank) and remove the sub-
tank 6 along with the damper rod assembly 7.
• Remove the fork spring 8.
Do not attempt to disassemble the damper rod assem-
bly.
The damper rod assembly is available only as an
assembly.
• Remove the dust seal 9.
• Remove the stopper ring 0.
Scratches on the inner tube could cause oil leaks.
Avoid scratching when removing.
CAUTION
CAUTION
CAUTION
FRONT FORK AND STEERING 17-7