Suzuki RM-Z250 Owner's Service Manual page 281

17-26 FRONT FORK AND STEERING
• Align the matching mark B on the handlebars with the clutch
lever holder matching surface.
• Tighten the upper bolt first temporarily to provide clearance
on the lower side and then tighten both the bolts.
• Install the engine stop switch and clamps.
• Install the front number plate and protector.
INSPECTION AFTER INSTALLATION
• Front fork (!2-33)
• Steering (!2-34)
• Wiring harness, cable and hose routing (!19-18 to -23)