Chapter 8: Technical Hints; Chapter 9: Putting The Tool Out Of Operation; Appendix - Titan EHS Operation Manual

8. Technical Hints
For safety reasons and in order to avoid a rise in temperature an automatic switch off of temperature is
integrated in all types of the Titan
off due to high temperature (all light-emitting diodes on operation desk are flashing), do not switch off
power supply otherwise the cooling ventilation is out of operation! The tool is ready for use again after a
9. Putting the Tool out of Operation
When not in use keep your Titan
Swivelling parts have to be conserved against oxidation

10. Appendix

• Technical Details (Flow Chart)
• Technical Order (Replacement of Power Supply Plug) - Page 23
• Accessories: e. g.: Standard Adapter STA, Standard Connector STABI, Torque Sensor DMA,
Standard Nut STACO etc.
• Explanations of Conformity, EU-Standards, CE etc.
IMPORTANT!
- EHS / EFC / EFC/L-Torque Wrenches. In case the tool has turned
®
short period of cooling (LEDs have stopped flashing).
- Torque Wrench in a dry, secure place out of reach of children.
®
SUPERIOR BOLTING SOLUTIONS SUPERIOR BOLTING SOLUTIONS
27
1.866.345.8484 1.866.345.8484
TITAN TITAN
TI TI
www. www. .com .com