Chapter 6: Working Test; Visual- And Mechanical Check; Meeting The Deadline; Chapter 5: Noise And Vibrations - Titan EHS Operation Manual

5. Noise and Vibration
Sound pressure level: measured in accordance with German Machinery-Noise-Information-Leaflet - 3.GSGV
dated 18. January 1991, §1,paragraph 1e, at maximum equipment performance is just over 85 dB(A).
Please use ear protection in this case! In accordance with §1, paragraph 2 of the same leaflet, sound pressure levels
were measured for different working cycles, with the sensor positioned at a distance of 1m to the geometric centre of the
machine. Vibrations become moderate just prior reaching the pre-set torque.
6. Working Test6.1
Visual- and Mechanical Check
Check grounded cords and plugs, operational- and elements of display, housing and accessories, i.e.
Support Arm (DMA) etc. regularly. Faulty parts must be replaced by authorized personnel only or return
the tool in original packaging to your nearest Titan - Partner or manufacturer. Particles of dirt within
®
the hydraulic system may result in disturbances, faulty functions and break down of motor.

6.2 Meeting The Deadline

The following operational- and service requirements must strictly be adhered to.
24