Titan EHS Operation Manual page 23

4.2 Tightening and Loosening Titan -EFR and Titan -EHS-SG
® ®
Titan - EFR (Drawing left side)
®
CAUTION!
Insert the support bolt (8) completely in the
housing bolts of the Titan - EFRTorque
®
Wrench in order to avoid damage.
For tightening and loosening screw connections
follow the same instructions as stated with the
Titan - EHS Torque Tools. On the radial drive of
®
the Titan - EFR the torque wrench can be
®
operated in a 90-degree angle due to the drive
direction (6). The drive is carried out by a fixed socket
size (4). The Titan - STA is used to reduce the
®
socket size (7). Torque support is done by a support
bolt (8). Make sure to have a safe and stable support
(5). (Also see Drawing below.)
Application Titan - EFR
®
22