Finishing/-Interrupting Operation - Titan EHS Operation Manual

Titan - EHS-SG
®
Titan -STA
®
Standard Adapter
4.3 Finishing or Interrupting Operation (also with Replacements)
When not in use, before maintenance and when replacing tools always disconnect the Titan
power supply.
Never carry the tool by the power cord. Always disconnect the cord by pulling at the plug. Protect cord
For tightening and loosening screw connections follow
the same instructions as stated with the Titan
Place the Titan
operate the tool perpendicular to screw axis (6). The drive
is carried out by a fixed socket size (4). The Titan
- STA is used to reduce the socket size (7). Torque
support is done by a support bolt (8). Make sure to have
a safe and stable support (5). (Also see Drawing below.)
Application Titan
WARNING!
from heat, oil and sharp edges to avoid accidental shock.
23
SUPERIOR BOLTING SOLUTIONS SUPERIOR BOLTING SOLUTIONS
- EHS-SG completely on nut and
®
-EF-SG
®
1.866.345.8484 1.866.345.8484
- Torque Tools.
®
®
- EHS Torque Wrench from
®
TITAN TITAN
TI TI
www. www. .com .com