Non-Hot-Plug Procedures - HP ProLiant ML370 Maintenance And Service Manual

Removal and Replacement Procedures

Non-Hot-Plug Procedures

You must power down and remove power from the server to perform non-hot-plug removal
and replacement procedures. The procedures in this section are for non-hot-plug service
items, regardless of rack type or environment.
2-24
CAUTION: To avoid the risk of damage to the system or non-hot-plug expansion boards,
disconnect all AC power cords before installing or removing non-hot-plug expansion boards.
Moving the Power On/Standby button to the Off position still provides auxiliary power to the
PCI-X expansion slot and may damage the board or other system components.
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide