Speed Control - Seagull Models EXTRA EA 300L Assembly Manual

3) Attach the motor to the front of the electric
motor box using four 4mm blind nut, four
M3x15mm hex head bolts to secure the motor.
Please see picture shown.
Nut M3
4) Locate the plywood battery tray to the
fuselage. Tighten the screws using machine
screws M3x15mm to secure the tray in position.
www.seagullmodels.com
4mm
3 x 15mm
110mm
Balsa
Epoxy

Speed Control

5) Attach the speed control to the side of the
motor box using two-sided tape and tie wraps.
Connect the appropriate leads from the speed
control to the motor. Make sure the leads will
not interfere with the operation of the motor.
Epoxy.
speed control.
15