Sprint PCS Connection Card CF2031 User Manual page 87

The PCS Connection Manager Keypad
Keypad Buttons
0-9, #,
*
(or the same keys on
your keyboard)
1
TALK
(<Enter> on your
keyboard)
END
(<Esc> on your
keyboard)
BACK
(<Backspace> on your
keyboard)
Volume Control
Voice Mute
(Pocket PCs)
Function
Enter the digits (and other characters) you want to dial. The
numbers are displayed in the message area until you press
, , or
TALK END BACK
If you click (or press) these buttons during a call, the card
beeps and the characters are displayed in the message area.
In addition to acting as a number key, the
to access voicemail. Press the
connect to your voicemail.
Place and answer incoming calls. When you are not
receiving an incoming call,
message area. If no numbers are displayed, the card redials
the last number you dialed.
End a call or clear all the digits and characters in the
message area (cancel a call that you've started to enter).
This button also clears most status messages.
Clear the last number you've entered. Press and hold
to clear an entire entry.
Increase or decrease the headset volume.
Notebook PCs: To increase the volume, move the slider to
the right. To decrease the volume, move the slider to
the left.
Pocket PCs: To increase the volume, move the slider up. To
decrease the volume, move the slider down.
Tap to mute the phone's microphone for privacy. Tap again
to unmute.
Section 3: Using the PCS Connection Card
, or you receive an incoming call.
key followed by
1
dials the numbers in the
TALK
3D: Voice Connections 81
key can be used
1
to
TALK
BACK