Uninstalling The Pcs Connection Manager Software - Sprint PCS Connection Card CF2031 User Manual

Error: Not In Service
The PCS Connection Manager displays the message "
Possible Causes
Inadequate signal strength may occur
for any of these reasons:
You are outside the enhanced
a.
Sprint Nationwide PCS Network.
Your antenna is not attached or is
b.
pointed in the wrong direction.
You may be inside a building or
c.
near a structure that is causing
radio interference.
Uninstalling the PCS Connection Manager
Software
To uninstall the PCS Connection Manager Software from the host PC:
If your Pocket PC is connected to the host, disconnect it.
1.
On the host, open the Control Panel by selecting
2.
Control Panel
Double click the
3.
Add/Remove Programs window.
Click to select
4.
Double click the
5.
Confirm that you want to delete the program by clicking
6.
Click
7.
To remove the software from a Pocket PC:
Eject the PCS Connection Card if it is inserted in your PCMCIA jacket
1.
(and the jacket is attached).
Tap
2.
Tap the
3.
Tap the
4.
Tap
5.
Confirm that you want to remove the program by tapping
6.
Section 3: Using the PCS Connection Card
114 3G: Troubleshooting Tips (Pocket PCs)
.
Add/Remove Programs
PCS Connection Manager
Add/Remove
.
Finish
Start > Settings
tab.
System
Remove Programs
PCS Connection Manager
Suggestions
Verify that you are within the enhanced
a.
Sprint Nationwide PCS Network. Coverage
maps are available at
Ensure your antenna is properly attached.
b.
Re-orient your antenna.
Change your location.
c.
button.
.
icon.
and tap the
Not in service
www.sprintpcs.com
Start > Settings >
icon to open the
.
OK
button.
Remove
."
.
.
.
Yes