Getting Started; The Pcs Connection Card Software; Activating And Using Pcs Service - Sprint PCS Connection Card CF2031 User Manual

Getting Started

Before you can begin using the PCS Connection Card, you must:
Install the PCS Connection Manager Software.
1.
Activate your PCS Account and configure the PCS Connection Card to
2.
use your account, unless the card has been pre-activated.

The PCS Connection Card Software

The PCS Connection Card comes with this software:
PCS Connection Manager Software, which allows you to manage
the PCS Connection Card and monitor your connections.
The driver software that forms the interface between the
PCS Connection Card and your Windows operating system
The software must be installed before you insert the PCS Connection Card
for the first time. Detailed instructions are provided, starting on page 17
(for notebook PCs) and on page 27 (for Pocket PCs).

Activating and Using PCS Service

Before using your PCS Connection Card, you must first set up your
PCS Connection Card wireless network account.
To set up your PCS Connection Card wireless network account:
Call PCS Customer Service Solutions.
If you will be using your PCS Connection Card primarily for business
purposes, call
If your card is intended primarily for personal use, call
1-888-715-4588
You should have the following information available:
Your billing address
Your Social Security or Tax ID number
Your driver's license number
Your PCS Connection Card's ESN (electronic serial number)
The ESN is printed on the label on the back of the card and can also
be displayed during the installation process.
A pen and paper to write down your account information
Section 1: PCS Connection Card Basics
12 1B: Getting Started
.
1-877-789-3969
.