Sprint PCS Connection Card CF2031 User Manual page 103

Error: Not In Service
The PCS Connection Manager Software displays the message
"Not in service."
Possible Causes
Inadequate signal strength may occur
for any of these reasons:
You are outside the enhanced
a.
Sprint Nationwide PCS Network.
Your antenna is not attached or is
b.
pointed in the wrong direction.
You may be inside a building or
c.
near a structure that is causing
radio interference.
Error: Not able to prepare data services (Windows 98SE and 2000)
The PCS Connection Manager Software displays the message "Unable to
prepare data services."
Possible Causes
You need to perform the high-
•
security 128-bit upgrades required
for IOTA execution.
Suggestions
Verify that you are within the enhanced
a.
Sprint Nationwide PCS Network. Coverage
maps are available at
Ensure your antenna is properly attached
b.
and is perpendicular to the card. Re-orient
your antenna.
Change your location.
c.
Suggestions
Perform upgrades as described in the
•
release notes. Upgrades may be
downloaded from:
Windows 98SE upgrade to IE6 installation:
http://www.microsoft.com/windows/
ie/downloads/ie6/default.asp
Windows 2000 High Encryption Pack:
http://www.microsoft.com/
windows2000/downloads/recom-
mended/encryption/default.asp
Section 3: Using the PCS Connection Card
3F: Troubleshooting Tips (Notebook PC) 97
.
www.sprintpcs.com