Sprint PCS Connection Card CF2031 User Manual page 41

Downloading the Software to the Pocket PC
To download the software to the Pocket PC:
Connect the Pocket PC to the host via serial cable, USB cable or
1.
infrared port. This will launch the ActiveSync
Note: If you are unable to establish a connection, launch ActiveSync
from the Start menu and use the online help in ActiveSync
If your ActiveSync
2.
window, the initial prompt should read, "Would you like to set up a
partnership?" A New Partnership is not required to download
software. Select either
Select
3. Yes
default application install directory?"
When the download is complete, select
4.
check your mobile device screen to see if additional steps are
necessary to complete this installation."
Disconnect the Pocket PC from the host. You can then insert the
5.
PCS Connection Card following the procedures outlined in the
next section.
On completion of this step, the PCS Connection Manager Software and
the PCS Connection Card driver are installed and you can proceed to
activate your card. See "Activating Your PCS Connection Card" on page 38.
®
is configured to show the New Partnership
Yes
when asked to "Install the PCS Connection Card using the
Section 2: Installing the PCS Connection Card
or and click "Next."
No
when prompted, "Please
OK
2B: Installation on Pocket PCs 35
®
program.
®
.
®