Sprint PCS Connection Card CF2031 User Manual page 43

With the Sprint label facing toward the front of the Pocket PC, insert
3.
the card into the Type II Compact Flash slot at the top of the jacket.
DO NOT FORCE
Note: If your Pocket PC has a compatible Type II PC Card slot instead
of a Compact Flash slot, you must connect the PC Card adapter to the
PCS Connection Card before inserting the card into the Pocket PC's Type II
PC Card slot. (See illustration on page 23.)
The card is powered as soon as you insert it.
Removing the PCS Connection Card
Close any applications that have an open connection.
1.
Use the ejector to release the card and remove it from the slot.
2.
Disconnect the PCS Connection Card from the battery pack by
3.
pressing the battery release button and removing the battery pack at
a 45-degree angle. (See illustration on page 36.)
Note: If you remove the PCS Connection Card with the battery pack
connected, the card will remain on. To avoid running down the battery,
either disconnect the battery pack from the card or press and hold the
power button on the PCS Connection Card, located next to the antenna, to
power the card off.
Note: On Pocket PCs, anytime you eject and re-insert the PCS Connection
Card, restart your Pocket PC by turning it off and on again. This step is
necessary to ensure the communication port detects the card.
.
Section 2: Installing the PCS Connection Card
2B: Installation on Pocket PCs 37