Removing The Battery - Sprint PCS Connection Card CF2031 User Manual

Note: You MUST connect the battery pack when using the PCS Connection
Card with a Pocket PC. If not, fatal damage may occur to the Pocket PC.

Removing the Battery

To remove the battery from the battery pack (if the battery pack isn't
attached to the PCS Connection Card, skip to step 3):
Turn off your PCS Connection Card by pressing and holding the
1.
power button, located next to the antenna.
Disconnect the battery pack from the PCS Connection Card by
2.
pressing the battery release button on the battery pack.
Remove the battery cover from the back of the battery pack by sliding
3.
the cover in the direction of the arrow.
Lift up on the battery removal notch at the bottom of the battery bay.
4.
Note: If you remove the PCS Connection Card from your Pocket PC with
the battery pack connected, the device will remain on. To avoid running
down the battery, either disconnect the battery pack from the card or use
the power button next to the antenna to power the card off.
Section 2: Installing the PCS Connection Card
2B: Installation on Pocket PCs 31