Inserting And Removing The Pcs Connection Card - Sprint PCS Connection Card CF2031 User Manual

Click
10. OK
you are running Windows 98SE or Windows Me, restart your PC from
the
Start
On completion of this step, the PCS Connection Manager Software and
the PCS Connection Card driver are installed and you can proceed to
activate your card. See "Activating Your PCS Connection Card" on page 24.

Inserting and Removing the PCS Connection Card

Inserting the PCS Connection Card
Before you insert the PCS Connection Card, you must first install the
PCS Connection Manager Software. Once you have completed the
software installation procedure, you may insert your card into your
computer's PC Card slot.
To insert the PCS Connection Card into your notebook PC:
Connect the PCS Connection Card to the PC Card adapter.
1.
Insert the card/adapter unit face up into the notebook's Type II
2.
PC Card slot. The 68-pin connector, located at the end of the adapter,
should be inserted directly into the computer's Type II PC Card slot.
Note: If your notebook has a compatible Type II Compact Flash slot, you do
not need to use the PC Card adapter. Simply insert the PCS Connection
Card directly into the notebook's Type II Compact Flash slot.
Note: The PCS Connection Card should fit snugly, but you should be able to
insert or remove it easily from your computer's PC Card slot.
when you are notified that the installation is complete. If
menu.
PCS Connection Card
Section 2: Installing the PCS Connection Card
PC Card adapter
2A: Installation on Notebook PCs 23