Installing The Pcs Connection Manager Software (Windows 98Se, Me, 2000 And Xp) - Sprint PCS Connection Card CF2031 User Manual

Installing the PCS Connection Manager
Software (Windows 98SE, Me, 2000 and XP)
Follow the instructions below to install the PCS Connection Manager
from the installation CD. This process requires you to restart your
PC at the end of the installation; therefore, we recommend that you
quit all other open applications before you begin installation. The
PCS Connection Manager automatically determines your PC's operating
system and installs all appropriate software modules.
Note - Windows 98SE: Users of Windows 98SE must ensure that
Windows Dial-Up Networking and TCP/IP protocol are installed.
Note - Windows 2000 and XP: Users of Windows 2000 and XP must insert
the card prior to installing the software. (See "Inserting and Removing the
PCS Connection Card" on page 23.) Windows 2000 users must be logged in
with administrative privileges. You may also require administrative with XP,
depending on your XP installation.
Installing the PCS Connection Manager Software and the
PCS Connection Card driver:
If the PCS Connection Manager CD is not already in your CD-ROM
1.
drive, insert it. The CD should auto-start and display a menu.
If the CD does not auto-start, select
2.
d:\launch.exe
Section 2: Installing the PCS Connection Card
20 2A: Installation on Notebook PCs
where is the drive letter of your CD-ROM drive.
d
and enter
Start > Run
SM