Related Manuals for Sprint U772
Summary of Contents for Sprint U772
- Page 1 Sprint User Guide A downloadable, printable guide to your U772 USB Modem and its features. Available applications and services are subject to change at any time.
-
Page 2: Table Of Contents
Table of Contents GETTING STARTED Introduction Set Up Your Device Parts and Functions SIM Card Device Installation Windows, Mac, Linux Users Windows XP Users Only Activate Your Device USING YOUR DEVICE The Web Browser Interface Opening the Web Browser Interface The Landing Page Connecting to the Network The Device & Network Menu General Device and Network Information LTE Device and Network Information 3G Device and Network Information The Check Usage Menu LTE LED Operation 3G LED Operation SETTINGS The Settings Menu Connection Options Enable Airplane Mode Enable Auto Connection Change Your Connection Options Advanced Settings General Settings... - Page 3 Custom DNS Clone Configuration Download Current System Configuration Enter Backup Configuration File Path IPPT Configuration Roaming Configuration Updates Device Updates Automatic Version Check Software Update Engineering and Equipment Settings GETTING HELP For Assistance The Help Menu About User Guide Specifications Sprint Account Information and Help Sprint Account Passwords Manage Your Account Warranty and Service Customer Service Trademarks and Copyright Information Safety and Notices Safety Precautions Important Notice Safety and Hazards FCC Compliance RF Exposure Information and Specific Absorption Rate (SAR) Information INDEX...
-
Page 4: Getting Started
Getting Started The topics in this section will introduce you to your U772 USB Modem, help you get set up with service, provide an overview of the device, and get you started with basic device operations. Getting Started... -
Page 5: Introduction
Introduction The following topics describe the basics of using this guide and your new device. About the User Guide Thank you for purchasing your new U772 USB Modem. The following topics explain how best to use this guide to get the most out of your device. Before Using Your Device Read the Get Started guide and Important Information booklet that were packaged with your device thoroughly for proper usage. Accessible services may be limited by subscription contract conditions. Descriptions in the User Guide Note that most descriptions in this guide are based on your device's setup at the time of purchase. Unless otherwise noted, instructions begin from the device Web user interface home screen, which is displayed by opening a Web browser after inserting your device and entering http://sprintmodem or http://192.168.10.1. Some operation descriptions may be simplified. Note: The above addresses will not work correctly unless the device is inserted in your computer. Screenshots and Key Labels Screenshots and other illustrations in this user guide may appear differently on your device. Key labels in the user guide are simplified for description purposes and differ from the device Web user interface. Getting Started Introduction... -
Page 6: Set Up Your Device
Set Up Your Device The following topics give you all the information you need to set up your USB Modem and wireless service the first time. Parts and Functions These topics illustrate your device's primary parts and key functions. Note: Your device's screens and layouts are subject to change. This user guide uses sample images only. Your Device Device Layout The following illustration outlines your device's primary external features. Getting Started Set Up Your Device... -
Page 7: Sim Card
Main antenna port for external antenna attachments. CDMA/LTE Sub Antenna Secondary antenna port for external antenna attachments. USIM Card Cover Cover for the removable SIM card. Device Label Label which displays the device name, FCC ID and device MEID. SIM Card The SIM card is an IC card containing the device number and other customer information. Your device's SIM card is preinstalled and should only be accessed if directed by a customer service representative. Handling a SIM Card Keep the following in mind when handling a SIM card. You are responsible for any damage caused by inserting the SIM card in another-brand IC card reader, etc. Sprint is not responsible in such a case. Always keep the IC chip clean. Wipe clean with a dry, soft cloth. Avoid applying labels. May damage SIM card. See instructions included with SIM card for handling. The SIM card is the property of Sprint. The SIM card is replaceable (at cost) in case of loss/damage. Return the SIM card to Sprint when canceling subscription. ... -
Page 8: Device Installation
Always follow emergency procedures to suspend service if your SIM card or device (SIM card inserted) is lost or stolen. For details, contact Customer Service. Always power off the device before inserting/removing the SIM card. Insert SIM Card Follow these instructions to insert a SIM card. Remember to power off your device before inserting a SIM card. Note: Your device’s SIM card is preinstalled. These instructions are for reference only. 1. To open the SIM card cover, press down firmly on the lower back cover and pull down as indicated in the image above. 2. Insert the SIM card as shown in the picture above. Insert gently with gold IC chip facing downward. 3. Replace the SIM cover by gently pressing down and sliding forward until you feel a click. Device Installation The instructions below explain how to install the device on your laptop or computer. The following section is for Mac, Linux, Windows 7, 8, 8.1 and Windows 10 user only. Windows XP users can skip to the Windows XP Users Only section. Windows, Mac, Linux Users The instructions below will explain how to install the device on your Windows, Mac and Linux computer. 1. Turn on your computer and close all applications. 2. Insert the device into your USB port. Your computer will recognize the device and will install the driver automatically. Getting Started Set Up Your Device... -
Page 9: Windows Xp Users Only
3. Please allow a few minutes for the driver installation to complete. To use the Sprint LTE/3G Mobile USB on your Windows XP computer, you will need to install the Remote NDIS driver included in the modem memory and configure the device. See the Windows XP Users Only section for more information on driver installation and device configuration. Windows XP Users Only The instructions below will explain how to install the device on your Windows XP computer. 1. Turn on your computer and close all applications. 2. Insert the device into your USB port. Note: If you have inserted the device properly, Windows will inform you that it has found new hardware. Wait until Windows completes the “Found New Hardware” task. It is normal to hear a short beep each time you insert or remove the device. It is an audible notification that your computer recognizes the new hardware. 3. Your computer will recognize the device and install the Remote NDIS driver automatically. If the program does not launch automatically, proceed to Step 4. 4. Windows XP users running Service Pack 2 (SP2) or earlier: If your computer does not automatically install the RNDIS, click Start > My Computer, select Franklin Zero CD, and then double-click the Franklin-Installer.exe program. The Welcome to the MSS InstallWizard for Franklin 700 V4.14.0.0 screen will then appear. Click Install to continue the installation process. Getting Started Set Up Your Device... -
Page 10: Activate Your Device
5. Installation of Remote NDIS driver is now complete. Click Finish to leave the setup program. Activate Your Device Follow the instructions below to activate your device if it has not already been activated. Getting Started Set Up Your Device... - Page 11 Depending on your account or how and where you purchased your USB modem, it may be ready to use or you may need to activate it on your Sprint account. If you purchased your device at a Sprint Store, it is probably activated and ready to use. If you received your device in the mail and it is for a new Sprint account or a new line of service, it is designed to activate automatically. When you plug the device into your computer for the first time, open your Web browser and go to http://sprintmodem or http://192.168.10.1. You should see a Hands Free Activation message in your Web browser, which may be followed by a PRL Update screen and a Firmware Update screen. Follow the onscreen instructions to continue. If you received your device in the mail and you are activating a new device for an existing number on your account (you’re swapping devices), you can activate on your computer online. Activate on your computer: Go to sprint.com/activate and complete the online instructions to activate your device. To confirm activation, navigate to any Web page. If your device is still not activated or you do not have access to the Internet, visit sprint.com/support for assistance. If you do not have access to the Internet, call Sprint Customer Service at 1-888-211-4727. Note: If you are having any difficulty with activation, visit sprint.com/support. Getting Started Set Up Your Device...
-
Page 12: Using Your Device
Using Your Device The topics in this section will provide information on your device and interaction. This information will help you make connections, understand the device Web user interface, check your data usage and enable software updates and roaming services. Using Your Device... -
Page 13: The Web Browser Interface
The Web Browser Interface The Web browser interface is a Web-based connection manager for your device. It allows you to manage and monitor the Internet connection between your computer and the wireless network. It has a user-friendly interface and is equipped with many useful features that will enhance your Internet navigation experience. Opening the Web Browser Interface The instructions below will provide instructions on how to access the Web browser interface. To use the Web browser interface, please ensure the device is inserted. Once inserted, open a Web browser on your desktop and type http://sprintmodem or http://192.168.10.1 into the address window. The Landing Page The instructions below will provide additional information on your USB modem landing page. The Web browser will open the Device and Network page for your USB Modem as shown below. From this page, you can see and manage available network connections, see your current connection state, and see signal strength at a glance. Detailed menus for status and settings are displayed across the top of the menu. Using Your Device The Web Browser Interface... - Page 14 The main menu appears across the top of the browser interface and allows for ease of navigation. On the menu bar you will see options for: Device & Network, Check Usage, Settings and Help. Information regarding your current network connection can be seen in the Network Connection Box displayed on the left side of the main page. This box displays 3G and LTE connection information and has the following items: Using Your Device The Web Browser Interface...
-
Page 15: Connecting To The Network
“No Signal” No Signal Radio power is on but device has no signal. All actions are disabled. “Disconnected” Connect Radio power is on and device is disconnected. Ready to connect. “Connecting” Cancel Device is connecting and available to cancel the connection. “Connected” Disconnect Device is connected and available to disconnect the connection. “Not Activated” Not Activated Device activation is required. Connecting to the Network The following instructions will provide information on connecting to the network and switching between LTE/3G. Once your device is properly configured, connecting to the Internet is as simple as plugging in your device. By default, it connects automatically to the Sprint network. If you wish to change this option, please refer to the instructions in Connection Options. The Device & Network Menu The Device & Network menu allows you to view information about your device and network status. Using Your Device The Web Browser Interface... -
Page 16: General Device And Network Information
General Device and Network Information The instructions below will guide you through the general device and network information within the Web user interface. To view basic device information click Device & Network on the menu bar and the select the General Device & Network Information dropdown arrow to view your basic device information. Using Your Device The Web Browser Interface... -
Page 17: Lte Device And Network Information
General Device Device Name – name of the device Device Description – description of the device Manufacturer – manufacturer of the device Modem Model – model name of the device Hardware Version – current internal hardware version CM Version – current CM version IMEI – the International Mobile Equipment Identity number of the device General Network IP Address – the current Internet Protocol address of the device Gateway – the current network point entrance address DNS Server – the current Domain Name Server system address Data Received – the number of bytes received Data Sent – the number of bytes sent Data Total – the total data received and sent. Data totals are estimates and should not be used for billing purposes. LTE Device and Network Information The following instructions will show you how to view LTE and network information on your device. To view basic LTE network information click Device & Network on the menu bar and the select the LTE Device &... -
Page 18: G Device And Network Information
IMSI – the International Mobile Subscriber Identity (IMSI) number ICCID – the Integrated Circuit Card ID (ICCID) number USIM State – the current state of the Universal Subscriber Identity Module (USIM) LTE Network Status – current network status SNR – the current Signal-to-Noise Ratio (SNR) RSRP – the current Reference Signal Received Power (RSRP) RSRQ – the current Reference Signal Received Quality (RSRQ) PLMN ID – the current state of Public Land Mobile Network ID 3G Device and Network Information The following instructions will show you how to view 3G and network information on your device. To view basic 3G network information click Device & Network on the menu bar and the select the 3G Device & Network Information dropdown arrow to view the 3G network information. 3G Device MEID – unique number the network uses to identify your device Technology – type of network you are connected to Firmware – current internal software version ... -
Page 19: The Check Usage Menu
PRL Version – used to verify that your Preferred Roaming List is the most current MSID (IMSI_S) – internal ID uses to identify your account 3G Realm – name of the domain 3G Network Status – current network status RSSI – measurement in dBm of current signal strength Ec/Io – measurement in dB of current Ec/Io The Check Usage Menu The instructions below will guide you through check usage menu. The Check Usage menu allows you to review your usage history online. Please ensure that you have an Internet connection. Selecting the Check Usage option displays your LTE and 3G data usage to date in a separate, pop-up window. Note: Usage details are only estimates and may not reflect your actual billing amount. Using Your Device The Web Browser Interface... -
Page 20: Lte Led Operation
LTE LED Operation The table below will provide instructions on the LED operation of your device when using the LTE network. LTE LED Color - Blue LTE Modes LED Behavior LTE in service and no activity On (Solid) Ready to connect to LTE No LTE service Flash every 1 second Acquiring LTE Service Flash every 1 second LTE Data Connected (Active) Flash every 0.5 second LTE Data Connected (Not Active) LTE Data Power Save Mode Firmware Web UI update Flash every 0.5 second 3G LED Operation The table below will provide instructions on the LED operation of your device when using the 3G network. 3G LED Color - Green 3G Modes LED Behavior 3G Service and Standby Mode On (Solid) Ready to Connect... -
Page 21: Settings
Settings The topics in this section w ill provide information on your device settings. This information will help you make changes to the settings on your device, change your connection preferences, change roaming options, update the device software and advanced settings. Settings... -
Page 22: The Settings Menu
The Settings Menu The Settings menu allows you to set your Connection Options and change your Advanced Settings. Connection Options Connection Options allows you change connection preferences and network options. Enable Airplane Mode The following instructions will show you how to enable airplane mode on your device. 1. Select or clear the Enable Airplane Mode check box. Enabling Airplane Mode will disable your device while traveling. 2. Click Save. Note: To re-enable your device, remove and reinsert into your computer. Enable Auto Connection The following instructions will show you how to enable auto connection on your device. Settings The Settings Menu... -
Page 23: Change Your Connection Options
1. Select or clear the Enable Auto Connection check box. 2. Click Save. Note: If you click Connect, Enable Auto Connection will be cleared automatically regardless of whether Enable Auto Connection was selected before rebooting the device. Change Your Connection Options The following instructions will show you how to change the connection options on your device. 1. Select a connection option (LTE and 3G Only, LTE Only, 3G Only). 2. Click Save. Note: If the device is not activated, the connections options will be unavailable. Advanced Settings The following will guide you through the advanced settings options for you device. The Advanced Settings menu allows you to set general settings, roaming configuration, manual configuration, and to update your device. It also allows you to access the engineering and equipment settings with additional security information. To access the Advanced Settings menus, you are required to log in as an administrator. The default password is “admin.” You will be able to change your password in the Advanced Settings menu. Settings The Settings Menu... -
Page 24: General Settings
General Settings The instructions below will guide you through the general settings options. Click General Settings to access LED and password settings. LED Control LED Control allows you to turn the LED on or off. To turn the LED on or off: Settings The Settings Menu... -
Page 25: Manual Configuration
1. Select or clear the Disable LED check box. 2. Click Save. Note: Refer to Appendix 1 for details about the LED lights on your device. Advanced Settings Password The Advanced Settings Password allows you to change the password. To change your password: 1. Enter the original password in the Original Password field (the default password is ‘admin’). 2. Enter your new password in the New Password field. 3. Re-enter your new password in the Confirm New Password field. 4. Click Save. Manual Configuration The instructions below will guide you through the manual configuration options on your device. Manual Configuration allows you to set device configurations manually. Manual Configuration options include LTE Configuration, UICC Unlock, 3G Configuration, Custom DNS, Clone Configuration and IPPT Configuration. LTE Configuration The LTE Configuration box allows you to modify your LTE device configuration. Settings The Settings Menu... -
Page 26: Uicc Unlock
UICC Unlock The UICC Unlock box allows you to unlock your UICC card. You will need to contact Sprint Customer Care to request permission to unlock. 3G Configuration The 3G Configuration box allows you to modify the 3G device configuration. Note: The 3G Configuration options require you to enter your device’s Master Subsidy Lock (MSL) before you can access the menus. This may only be done under supervision of Sprint personnel. Contact Sprint Customer Service at 888-211-4727 for more information. Settings The Settings Menu... -
Page 27: Custom Dns
Custom DNS Custom DNS allows you to use a customized DNS rather than the one assigned by your network. To set the custom DNS: Settings The Settings Menu... -
Page 28: Clone Configuration
1. Select Enable Custom DNS. 2. Enter your Custom DNS IP address. 3. Click Save. Clone Configuration Clone Configuration allows you to download the current system configuration or restore a previously downloaded system configuration. Download Current System Configuration Follow these instructions to download the device system configuration to your computer. 1. On the WebUI menu bar select Settings > Advanced Settings > Manual Configuration > Clone Configuration. 2. Click Download. 3. Click Save after the file download dialog box is shown. 4. Select your folder. Enter Backup Configuration File Path Below are the instructions on how to restore a previously downloaded configuration. 1. On the WebUI menu bar select Settings > Advanced Settings > Manual Configuration > Clone Configuration. -
Page 29: Ippt Configuration
IPPT Configuration The following instructions will show you how to enable or disable IP Pass-through mode. Checking the box allows you to either enable or disable IP Pass-through. Check or uncheck, and click Save. Note: When IP Pass-through (IPPT) mode is enabled, you will be unable to utilize http://sprintmodem to access the Web UI. Please use the IP address: http://192.168.10.1 to access the WebUI when in IPPT mode. Settings The Settings Menu... -
Page 30: Roaming Configuration
Roaming Configuration The instructions below will guide through roaming options on your device. Roaming Configuration allows you to set your Roaming preferences. 1. Select a roaming mode (Home Only or Automatic). 2. Select or clear the Enable International Roaming check box as needed. 3. Select a roaming guard option. 4. Click Save. Important: After clicking Save, the device will reboot. DO NOT remove the device from your computer before the device finishes rebooting. If you remove the device improperly, the modem may be damaged. Note: If you select Home Only, the device will search only for the Sprint network and no roaming networks will be used. (International Roaming and Roaming Guard options will be disabled and grayed out). If you select Automatic, the device will use any available network. Settings The Settings Menu... -
Page 31: Updates
Updates The following will provide instructions on how to update your device. The Updates menu lets you update your device's Data Profile, PRL (Preferred Roaming List), and Firmware, as well as check and update your device software version. Device Updates The Device Updates tab allows you to update your network profile, your PRL, and firmware. To update: 1. Select the button for anything you wish to update. 2. Click Update. Automatic Version Check The instructions below will provide information on automatic version check options for your device. Settings The Settings Menu... -
Page 32: Software Update
In order to ensure that your device is running the latest version of software and firmware, you will receive automatic notifications. Select or deselect the Enable notification box and click Save. Important: After clicking Update, the device will start the update. At the end of the update, the device will reboot. DO NOT remove the device from your computer before the device finishes rebooting. If you remove the device improperly, the modem may be damaged. Software Update The instructions below will provide information on software updates for your device. The Software Update tab reflects your current software version and allows you to upgrade the Web browser interface as needed. To get the latest Web browser interface: 1. Click Download. 2. If a newer version is available, you will see the following dialog: 3. Click Yes and select a folder to save the Web browser update, or, select Download to PC to save to your desktop. 4. If no updates are currently available, you will see the following dialog: To update: 1. Click Choose file for the Web browser update. 2. Click Browse and select system update file. 3. Click Start Upgrade. Important: The system upgrade takes a few minutes. DO NOT unplug the device before the browser refreshes the page automatically or if the refresh dialog is still open. Engineering and Equipment Settings The following will provide additional information engineering and equipment settings for your device. Settings The Settings Menu... - Page 33 The Engineering and Equipment settings menus allow Sprint to access advanced options for your device. These menus require your device’s Master Subsidy Lock (MSL) for access, and they may only be accessed under supervision of Sprint personnel. Contact Sprint Customer Service at 888- 211-4727 for more information. Settings The Settings Menu...
-
Page 34: Getting Help
Getting Help The topics in this section w ill cover help tips, device specifications, how to contact Sprint and manage your wireless service, and important safety and compliance notices. Getting Help... -
Page 35: For Assistance
For Assistance The following topics address areas of support for your device, including using the Help menu, troubleshooting, specifications, account information, warranty information, and customer service contact information. The Help Menu The Help menu allows you to view system information and the online user guide. About When About is selected, it displays your device's system name and connection manager version. Getting Help For Assistance... -
Page 36: User Guide
System Name – the current system name CM Version – the current device software version User Guide The following instructions will provide information on how to obtain the user guide for your device. When you select User Guide, you will be re-directed to the Sprint Support site to download. To find the User Guide for the U772, select Sprint as the manufacturer and then select U772 USB Modem. Specifications The following tables list your device specifications. Device Specifications Item Description Weight Device alone: Approx. 39g Dimensions Approx. 35 x 84.5 x 17mm Getting Help For Assistance... -
Page 37: Sprint Account Information And Help
Item Description Maximum Output 3G: 0.321 W LTE: 0.142 W Communication Speed LTE: Up to 100 Mbps downlink/up to 50 Mbps uplink CDMA: Up to 3.1 Mbps downlink/up to 1.8 Mbps uplink Sprint Account Information and Help Find out about account passwords and information about managing your account and finding help. Sprint Account Passwords You will need to create passwords to protect access to your personal account information and your data services account. As a Sprint customer, you enjoy unlimited access to all your information. Account User Name and Password If you are the account owner, you will create an account user name and password when you sign on to sprint.com/mysprint. (Click Register and follow the prompts to get started.) If you are not the account owner (if someone else receives the bill for your Sprint service), you can get a sub-account password at sprint.com/mysprint. Data Services Password With your Sprint device, you may elect to set up an optional data services password to control access and authorize purchases. For more information, or to change your passwords, sign on to sprint.com/mysprint. Manage Your Account Manage your Sprint account from your computer, tablet or smartphone. -
Page 38: Warranty And Service
Your device purchase includes Warranty. Confirm shop name and purchase date. Read contents of Warranty and keep it in a safe place. Check warranty period in the Warranty. Services Before submitting your device for repairs, contact Customer Service or General Information; be prepared to describe the problem in detail. During the warranty period, repairs will be made under the terms and conditions described in the Warranty. After the warranty period, repairs will be upon request; if said repairs can be made, you will be charged for them. Customer Service For mobile broadband device or service information, call Sprint Customer Service. Sprint Customer Service You can reach Sprint Customer Service online or by calling toll-free. Sign in to your account at sprint.com/mysprint. Call toll-free at 1-888-788-4727 (business use) or 1-888-211-4727 (personal use). Trademarks and Copyright Information The names of companies, products, and services used in this guide are registered trademarks or trademarks of the respective companies. ©2016 Sprint. Sprint and the logo are trademarks of Sprint. Other marks are trademarks of their respective owners. Getting Help For Assistance... - Page 39 Franklin Wireless logo is a trademark or registered trademark of Franklin Wireless Corporation in US. Copyright © 2016 Franklin Wireless Corporation. All rights reserved. Getting Help For Assistance...
-
Page 40: Safety And Notices
Safety and Notices The following topics address important safety precautions, general notes, and required RF exposure information for your mobile broadband device. Safety Precautions The following topics outline important safety precautions that must be observed when using your device. Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sprint Pocket Wi-Fi are used in a normal manner with a well-constructed network, your device should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sprint accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using your device, or for failure of your device to transmit or receive such data. Safety and Hazards Do not operate your device under the following conditions. In areas where blasting is in progress Where explosive atmospheres may be present Near medical equipment Near life support equipment, or any equipment that may be susceptible to any form of radio interference. In such areas, your device MUST BE POWERED OFF. Your device can transmit signals that could interfere with this equipment. Do not operate your device in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, your device MUST BE POWERED OFF. When operating, your device can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular devices while the aircraft is on the ground and the door is open. Your device may be used at this time. The driver or operator of any vehicle should not operate the device while in control of a vehicle. ... -
Page 41: Fcc Compliance
FCC Compliance FCC Part 15.19 Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Part 15.105 Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Part 15.21 Statement: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. RF Exposure Information and Specific Absorption Rate (SAR) Information The following topics detail the specific absorption rate (SAR) information, electromagnetic safety ... - Page 42 The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of https://www.fcc.gov/general/fcc-id-search-page after searching on FCC ID: XHG-U772S More information on the device's SAR can be found from the following FCC website: https://www.fcc.gov/general/fcc-id-search-page. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. Body-Worn Operation Please note this important safety information regarding radio frequency (RF) radiation exposure and near-body operation. To ensure compliance with RF exposure guidelines, the device must be used at least 5 mm from your body. Failure to observe this warning could result in RF exposure exceeding the applicable guideline limits. Specific Absorption Rate (SAR) Information The following is a table of the maximum SAR values as observed on the U772. Band Channel Maximum SAR Value LTE Band 25 26365 1.17W/Kg PCS 1900 1175 1.16W/Kg Cellular 800 1013 1.06W/Kg Secondary 800 1.1W/Kg Getting Help Safety and Notices...
-
Page 43: Index
LTE Configuration 22 Backup Configuration 25 Mac 5 Check Usage 16 Manual Configuration 22 Clone Configuration 25 MEID 4, 15 Communication Speed 34 Mobile Number (MDN) 15 Connection Options 19 Custom DNS 24 Customer Service 35 Power On 5-6 PRL Version 16 Data Services Password 34 Device Installation 5 Roaming Configuration 27 Device Layout 3 Roaming Guard 27 Device Updates 28 Roaming Mode 27 Dimensions 33 RSSI 16 Ec/Io 16 Safety Precautions 37 SAR 38-39 Services 35 SIM card 4 FCC Compliance 38 Specifications 33 Firmware 15 Sprint Account Management 34 Passwords 34 General Settings 21 Status 16 Home Carrier Name 15 Technology 15 Index... - Page 44 The Help Menu 32 The Settings Menu 19 Trademarks and Copyright Information 35 Turn Device On 5-6 UICC Unlock 23 Updates 28 User Name (NAI) 15 Warranty 35 Weight 33 Windows 5 Windows XP Users Only 6 Index...
Need help?
Do you have a question about the U772 and is the answer not in the manual?
Questions and answers