Video Output Signals And Servo Reference Signal - Panasonic aj-spd850p Operating Instructions Manual

Video output signals and servo reference signal

This section explains how the output signals and servo
reference signal are selected.
External synchronization of video output signals
The video output signals are output in synchronization with
the REF VIDEO input signal or video input signal.
As shown in the figure below, this signal is selected in
accordance with the setup menu settings, deck mode and
availability of the video input signal.
Start
What is the
EXT
setup menu No. 304 (REF
LOCK) setting?
AUTO/AUTO1
Has the unit
been set to the recording
mode?
NO
Is the
REF VIDEO input signal
available?
NO
Internal synchronization
Notes:
YES
Is the
REF VIDEO input signal
available?
YES
YES
Synchronization with the
REF VIDEO input signal
– 59 –
Synchronization is determined as follows depending
on the availability of the REF VIDEO input signal when
"BB", "CB100" or "CB75" has been selected as the setup
menu No. 600 (INT SG) setting.
• When the REF VIDEO input signal is available:
Synchronization with the REF VIDEO input signal
• When the REF VIDEO input signal is not available:
Internal synchronization
N-VF
setup menu No. 601 (OUT
VSYNC) setting?
NO
NO
video input signal available?
video input signal a composite
NON-STD
the setup menu No. 303
(STD/NON-STD)
NON-STD
video input signal a standard
or non-standard
Synchronization with
the video input signal
What is the
VF
Is the
YES
Is the
NO
signal?
YES
What is
STD
setting?
AUTO
Is the
signal?
STD