Control reference guide (continued)
Front panel — Under section (2/3)
HEADPHONES
AUDIO MIX
1&2
3&4
REC CH1/3
CH1/3 CH2/4
PULL
REC CH2/4
CH1/3 CH2/4
MENU button
Press to show the setup menus on the 3.5-inch color
LCD and the TV monitor (when using the VIDEO OUT 3
or SDI OUT 3 connector (optional)). The setup menu
numbers appear on the memory card recorder's display
panel.
Press again to exit the setup menu and restore the
original status.
TC PRESET button
Set the TC or UB value (See page 57).
When setting the TC or UB value, press this button first
to stop the data. The set of digits whose display is
flashing is then changed. (However, the button and
display will not function while thumbnails are displayed.)
SLOT SELECT button
In the stop status, use this to set the P2 card on which
the recording is to begin.
Each time you press this button, the numbers of the
slots you can record to appear in order.
THUMBNAIL button
Press this and the button lights and thumbnails appear
on the 3.5-inch color LCD and TV monitor.
Press again to exit the thumbnail screen. The button
also goes dim.
MENU BAR button
Press this button in the thumbnail screen and the cursor
moves to the menu bar at the bottom of the screen.
Press again to restore the original status.
MARKER button
Press to switch clip markers on and off.
In the thumbnail screen, press to switch on or off the
marker in the clip indicated by the cursor.
SET button
Press to confirm settings in the thumbnail screen, in the
setup menus and when creating play lists.
PLAYLIST button
Press when creating play lists or to play according to a
play list. The button lights and the play list screen
appears on the 3.5-inch color LCD and the TV monitor
(when using the VIDEO OUT 3 or SDI OUT 3 connector
(optional)).
Press again to exit the play list screen. The button also
goes dim.
METER
INPUT SELECT
FULL/FINE
VIDEO
AUDIO
AUDIO MON SEL
MIX
L
R
CH 1
CH 2
CH 3
CH 4
REC
UNITY
PB
VAR
AUDIO VOL SEL
ENC
VIDEO
CHROMA
CONTROL
LEVEL
LEVEL
REMOTE
PRESET
LOCAL
MANUAL
COUNTER
MENU TC PRESET SELECT
MENU
RESET THUMBNAIL
BAR
PLAY
PLAY LIST EVENT INSERT
GO TO
DELETE
REW
STOP
IN
ENTRY
OUT
PREV
SET UP
HUE
TC
BLK
CHROMA PH
PRESET
PRESET
PRESET
REGEN
REC RUN
MANUAL
MANUAL
MANUAL
PRESET
FREE RUN
EVENT button
While the PLAYLIST button is lit, press and it lights and
you can enter events (IN and OUT points).
Press again to exit the mode. The button also goes dim.
INSERT/DELETE button
Press to insert or delete play list events.
While a play list is being displayed (the PLAYLIST
button lights), select the event you want to insert and
press this button to insert the event.
While a play list is being displayed (the PLAYLIST
button lights), select the event you want to delete and,
while pressing the SHIFT button, press this button to
delete the event.
GO TO button
Press to move to events in a registered play list.
While a play list is being displayed (the PLAYLIST
button lights), select the event and, while pressing the
IN (or OUT) button, press this button to move the cursor
to the IN (or OUT) point.
IN button
Use when creating play lists.
In the play list creation mode (the PLAYLIST and
EVENT buttons light) press this button together with the
ENTRY button to set the IN point.
Press together with the RESET button to clear an IN
point you have set.
ENTRY button
Use when creating play lists.
In the play list creation mode (the PLAYLIST and
EVENT buttons light) press this button together with the
IN (or OUT) button to set the IN (or OUT) point.
OUT button
Use when creating play lists.
In the play list creation mode (the PLAYLIST and
ENTRY buttons light) press this button together with the
ENTRY button to set the OUT point.
Press together with the RESET button to clear an OUT
point you have set.
– 11 –
SLOT
SEARCH
SHTL
SLOW
PUSH
MARKER
JOG
SET
REC
FF
PULL
SHIFT
Memory Card Recorder AJ-
NEXT
DIAG