Panasonic aj-spd850p Operating Instructions Manual page 27

Graphic User Interface (GUI) (continued)
Thumbnail display settings
Thumbnail display options can be customized as suitable
for the intended use.
(1) Press the THUMBNAIL button.
The thumbnail screen is displayed on the LCD.
(2) Press the MENU BAR button.
The pointer moves to the menu bar.
(3) On the menu bar, select [THUMBNAIL], then
[SETUP].
The following screen is displayed.
MARKER IND.:
Toggles the shot mark indicator display ON/OFF. The
default setting is display ON.
VOICE MEMO IND.:
Toggles the voice memo indicator display ON/OFF.
The default setting is display ON.
WIDE IND.:
Toggles the wide indicator display ON/OFF. The
default setting is display ON.
DATA DISPLAY:
The following clip time display options are available:
time code (TC), user's bit (UB), shooting time (TIME),
shooting date (DATE). The default setting is time
code.
DATE FORMAT:
The following recording date and time display formats
are available: year month day (YMD), month day year
(MDY), day month year (DMY). The default setting is
year month day (YMD).
This setting applies to the recording date displayed
under clip properties, and the recording date and time
displayed when DATE is selected for DATA DISPLAY.
THUMBNAIL SIZE:
Either LARGE or NORMAL can be selected for the
size of the thumbnails which are to be displayed on
the LCD monitor screen. The factory setting is
NORMAL.
EXIT:
Returns to the previous menu.
Network settings
Perform the network settings.
(1) Press the THUMBNAIL button.
The thumbnail screen is displayed on the LCD.
(2) Press the MENU BAR button, and select the
following from the menu bar: [OPERATION]
→ → [DEVICE SETUP] → → [NETWORK] → → [MANUAL].
Then select [IP ADDRESS] → → [DHCP ON]/[DHCP
OFF].
If [DHCP OFF] is selected, set IP ADDRESS,
SUBNETMASK and DEFAULT GATEWAY.
(3) Next set [LOCALHOST NAME] and [USER].
(4) Set whether [FTP] is to be used and [SAMBA].
Enter the settings using the search dial and SET button.
Shown below is the device setup configuration.
[OPERATION]
[DEVICE SETUP]
[NETWORK]
[EXIT]
[MANUAL]
[IP ADDRESS]
[LOCALHOST NAME]
[USER]
[FTP]
[SAMBA]
[EXIT]
Displaying the properties
This displays the clip properties, P2 card statuses and
device properties.
– 27 –
[DHCP ON]
[DHCP OFF]
[NEW USER]
[DELETE USER]
[CHANGE PASSWORD]
[SMB]
[WORK GROUP]
[EXIT]