Display - Panasonic aj-spd850p Operating Instructions Manual

Control reference guide (continued)

Display

TV system displays
The selected TV system is displayed here.
Switch between 525 interlace and 625 interlace in setup
menu No. 070 (TV SYSTEM) (See page 41).
: lights when 525 interlace TV system is selected.
525
: lights when 625 interlace TV system is selected.
625
REMOTE lamp
Lights when the CONTROL switch is set to [REMOTE].
INPUT SELECT display area
The indicator for the selected input signal lights. Except
for analog audio signals, the indicator flashes if there is
no input of the selected signal type.
VIDEO
Y PB PR : Analog component video signals
CMPST : Analog composite video signals
SDI : Serial digital video signals (option)
SDTI/1394 : Compressed digital signals (option)
SG/SG 1/SG 2 : Internal reference signals
AUDIO
ANALOG : Analog audio signals
AES/EBU : Digital audio signals
USER SET : Recording audio signal selection
SDI : Serial digital audio signals (option)
SDTI/1394 : Compressed digital signals (option)
SG : Internal reference signals
SCH lamp
Lights when the SCH phase of the external
synchronized signal (REF VIDEO) is inside the
prescribed range.
At all other times, the lamp is off.
REC and REC INH lamps
REC:
lights when recording.
REC INH:
lights when recording is inhibited (the REC INH switch
at the upper front panel is set to [ON] or the card is
write-protected).
In this status, recording is not possible.
525 625 REMOTE
dB dB dB dB
0 0 0 0
–4 –4 –4 –4
–8 –8 –8 –8
–12 –12 –12 –12
–16 –16 –16 –16
–20 –20 –20 –20
–25 –25 –25 –25
–30 –30 –30 –30
– – – –
L R L R L R L R
SCH
VIDEO AUDIO
Y PB PR ANALOG
CMPST AES/EBU
USER SET
DVCPRO
SDI SDI
SDTI/1394 SDTI/1394
DV
SG 1 2 SG
CTL
TC
UB
Operation mode displays
The card transport status is displayed here.
: Normal playback or recording
: Playback at a speed slower than 1 x
: Playback at a speed faster than 1 x
: Fast forwarding (FF)
: Reverse playback at 1 x
: Reverse playback at a speed slower than 1 x
: Reverse playback at a speed faster than 1 x
: Rewinding (REW)
: Pause/still
Format displays
The recording format and the format of the card inserted
in the memory card recorder are displayed here.
Counter display
The card counter, time code, etc. are displayed here.
The type of value displayed is indicated by CTL, TC or
UB.
Level meters
These meters indicate the levels of CH1, CH2, CH3,
and CH4 of the PCM audio signals.
During recording or while E-E is selected, the levels of
the audio input signals appear; during playback, the
levels of the audio output signals appear.
Use the METER selector button to switch the audio level
display between FULL and FINE mode (See page 13).
For AJ-SPD850P
FULL mode FINE mode
dB
0
Reference
–4
level
–8
(–20 dB)
–12
–16
–20
–25
–30
–
L R L R
Each of the dots "
– 14 –
REC INH
50
For AJ-SPD850E
FULL mode FINE mode
dB
0
Reference
–4
level
–8
(–18 dB)
–12
–16
–20
–25
–30
–
L R L R
" indicates a 1 dB scale increment.