Recording and playing (continued)
Protecting against a possible erasure
Switch the write-protect switch of the P2 card to
[PROTECT].
Note:
Any attempt to change the position of the write-protect
switch during recording or playback or while the card data
is being accessed will have no effect until the recording
or playback is completed or the card data is no longer
being accessed.
PROTECT
Write-protect switch
– 18 –
P2 card access LEDs and P2 card status
P2 card
access LED
Green lighting
Recording and play are possible.
Recording and play are possible.
Orange lighting
The card is selected for recording.
The memory card recorder is accessing
Orange flashing
to record or play.
Quick orange
The memory card recorder is reading
flashing
card information.
The card has no remaining recording
capacity (play is possible).
Green flashing
The write-protect switch is switched to
PROTECT (play is possible).
The card is not formatted normally.
Format the card again.
Off
The data format on the card is not
standard. Change the card.
No card is inserted.
Note:
The statuses of the P2 cards can be verified in detail.
Refer to "P2 card status displays" on page 28.
P2 card status