Panasonic aj-spd850p Operating Instructions Manual page 32

Play List (continued)
Changing events
On the play list screen, move the pointer to the number of
the event to be changed, and press the EVENT button to
switch to the event screen. Play the images, and press
the IN or OUT + ENTRY buttons to change the IN or OUT
point.
Notes:
• If the changed IN point comes after an already
registered OUT point, the OUT point will be reset.
Conversely, if the changed OUT point comes before
an already registered In point, the start TC of the clip
concerned will be registered at the IN point.
• If the event following the event where the pointer is
positioned has not yet been registered, the pointer
will move to the following event.
• Set the IN and OUT points in such a way that the
DURATION of each event is at least 5 frames.
Otherwise, the events may not be played properly.
Moving events
This button is used to change the sequence of events in
the play list. In play list creation mode (the PLAYLIST
button light is on), move the pointer to the event segment
which is to be moved, then press the SET button. The
display colors reverse. In this state, the search dial can
be used to move the event up or down. After moving the
event, set its position by pressing the SET button again.
Moving a play list event
– 32 –
SET button
Search dial