Setup Menus - Panasonic aj-spd850p Operating Instructions Manual

Setup menus

The memory card recorder can hold five user files, each of
which has its own specific menu settings, and one of these
files can be selected for use.
Changing the file
(1) Press the MENU button
(2) When the FF button is pressed while holding
down the DIAG button, the next user file is
selected; conversely, when the REW button is
pressed while holding down the DIAG button,
the previous user file is selected
SYSTEM
FF REW
USER 1
FF REW
USER 2
FF REW
REW FF
USER 3
FF REW
USER 4
FF REW
USER 5
(3) To enter the selection made in step (2) for the
user file which is to be used, press the SET
button
The user file is changed and stored in the memory.
Note:
Since the SYSTEM menu items are not included in user
files 1 through 5, first select the user file and switch to the
SYSTEM file, and then set the SYSTEM menu items.
User files
Each user file contains the
following items.
• BASIC
• OPERATION
• INTERFACE
• EDIT
• TIME CODE
• VIDEO
• AUDIO
• V BLANK
• LCD
• MENU
– 35 –
Setting and releasing the lock mode
The lock mode can be set to protect the system file and
user file (USER2 to USER5) settings. Once the lock
mode is set, no further changes can be made to the
settings.
Setting and releasing the lock mode can be set for the
system file by using setup menu No. 40 (MENU LOCK)
and for the user files by using setup menu No.A03
(MENU LOCK).
(1) Press the MENU button
(2) Press the REW button or FF button while
holding down the DIAG button to select the file
for which the lock mode is to be set or released
(3) Turn the search dial
The cursor ( ) on the menu screen is moved to No. 40
(MENU LOCK) for the system file or to No. A03 (MENU
LOCK) for a user file.
(4) Turn the search dial while holding down the
SEARCH button to select whether the lock
mode is to be set or released
To set the lock mode:
Set 0001 (ON) as the setting.
To release the lock mode:
Set 0000 (OFF) as the setting.
When the lock mode has been set, "LOCKED" flashes
on the menu screen. The counter display stops flashing
and remains lighted.
SETUP-MENU
<USER2>
0 00 P-ROLL TIME
0 01 LOCAL ENA
0 02 CTL DISP
0 03 REMAIN SEL
0 08 DISPLAY SEL
0 09 CHARA H-POS
0 10 CHARA V-POS
0 11 CHARA TYPE
0 12 SYS FORMAT
(5) Press the SET button
The setting is stored in the memory.
Notes:
• The lock mode cannot be set for the USER1 file.
• Once set to the lock mode, a file cannot be reset to the
factory settings even by pressing the RESET button.
LOCKED
NO .0 0 0 - 0 0 0 5
5s
STOP
±12h
2L
T&STA
4
18
WHITE
50M