Chassis Assembly; Removal - Polaroid SprintScan SS35 Repair Manual

Slide Scanner Repair Manual Parts Replacement

Chassis Assembly

Removal

1. Remove the top housing.
2. Remove the main controller PC board.
3. Remove the transporter spring.
4. Remove the three (3) screws securing the chassis assembly to the bottom case (Figure 4-7).
5. Lift out the chassis assembly.
SS35/SS35 ES
Note: For original SS35 and SS35 ES
up to serial no. B6xxxxxxD.
Chassis Assembly
Bottom Case
SS35 PLUS
Note: For SS35 ES from serial no.
B6xxxxxxE and SS35 PLUS
Chassis Assembly
Figure 4-7. Removing chassis assembly
80