Polaroid SprintScan SS35 Repair Manual page 115

Slide Scanner Repair Manual
Item Box
Scanner SN
Station Name
CCD Configuration
CCD Config Data
GMT Test Sequence
CT Test Sequence
Table 5-5. Scanner Tester Panel
Used to enter the serial number (ID) of the slide scanner to be
tested.
If applicable, used to enter the test station name.
Allows the user to update or leave unchanged, the CCD
configuration. This selection is used when the CCD is
replaced with a newer generation unit.
After a test cycle is completed, the scanner test panel reports
the type of CCD used in the slide scanner. Type 0 or 1.
Lists the image quality tests that are sequenced when the
Geometric (GMT) test target is being used.
1 = Do test - Allows the user to select all or a particular
P/F (Pass/Fail) - Indicates whether or not a selected image
Lists the image quality tests that are sequenced when the Color
(CT) test target is being used.
1 = Do test - Allows the user to select all or a particular
115
Diagnostics and Troubleshooting
Description
image quality test. The tester default is all
tests selected.
One (1) indicates that the particular image
quality test is selected.
Zero (0) indicates that the particular image
quality test is not selected.
quality test passed (P) or failed (F).
image quality test. The tester default is all
tests selected.
One (1) indicates that the particular image
quality test is selected.
Zero (0) indicates that the particular image
quality test is not selected.