Polaroid SprintScan SS35 Repair Manual page 15

Slide Scanner Repair Manual
Feature
Power Receptacle
Power Cord
Power Fuse Receptacle
(SS35 Only)
Power Fuse
(SS35 PLUS)
SCSI ID Selector/Indicator
Table 1-2. Slide Scanner Features (Cont'd)
Description
Standard receptacle with ground.
Standard cord with ground.
The fuse receptacle contains two fuses: active and
spare.
The active fuse protects the slide scanner's electronics
from any sudden surges or overloads.
Note:
Not user accessible. Located on power supply PC
board.
The slide scanner's SCSI ID is preset at the factory
to 6.
SCSI ID position 7 is reserved for the SCSI adapter to
which the SCSI device(s) are connected.
Note:
If the active fuse fails (blows), always attempt to
find out the cause of the malfunction before
replacing the blown fuse with the provided spare.
Replace the spare fuse with a new one as
soon as possible.
DO NOT change this value unless other SCSI
devices are attached to the slide scanner and
one of them is assigned to SCSI value 6.
If the preset SCSI value must be changed, refer
to the applicable slide scanner User's Guide for
detailed instructions on how to change the slide
scanner's SCSI value.
15
Scanner Overview