Slide Scanner Repair Manual
7. Select Scanner Tester (w) to perform all IPT tests or, select one of the following
stand-alone tests that are listed above and below the Scanner Tester (w) choice:
•
Uniformity II.subVI - Tests Dark and Light Non Uniformity
•
Noise IIw power.subVI - Tests Dark Response
•
Motion&CR&Res- Tests Motion/Color Registration
•
ProgramXilinx&Dsp&gotoHiRes.vi - Scanner initialization and code download for
scanner internal programmable logic.
8. After the Scanner Tester software loads, a dialog box appears (Figure 5-7) requesting you
to select a Constants file.
9. Double-Click on the constants file for the slide scanner you are testing:
•
Constants SS35 V5.X for the SprintScan 35ES
•
Constants SS35+ V5.X for the SprintScan 35 Plus
•
Constants SS35+ V5.X (fw) for SprintScan 35 with filter wheel
Figure 5-7. Constants files
122
Diagnostics and Troubleshooting