Removing Chassis Assembly (With Filter/Motor); Chassis Assembly Mounting Screws - Polaroid SS35 LE Repair Manual

SprintScan 35LE Service Manual
Removing Chassis Assembly (with Filter\Motor)
1. Turn off the power and disconnect the power cord.
2. Remove the upper housing.
3. Remove the main PC board.
4. Remove the three (3) screws (Figure 2-9) securing the chassis assembly.
5. Lift out the chassis assembly.
Figure 2-9. Chassis assembly mounting screws
6. Remove the filter mount setscrew to remove the filter/motor assembly
(Figure 2-10) from the chassis assembly.
Note: Always refer to the Filter/Motor Assembly Alignment procedure in Section 3
of this Service Manual when reinstalling chassis assembly
Set screw, 1/8"
1 3
Disassembly