Components List; Installation Overview; Placement Clearance Requirements - kozy heat Dassel DSL-36 Installation And Operation Manual

#DSL-36 COMPONENTS LIST
PART NUMBER
DSL-770 Millivolt Board Assembly
700-203 Manual Gas Shut-off Valve
DSL-135 Burner / Log Grate Assembly
DSL-500 Log Package
DSL-057T Glass Frame Assembly
OCK-S53 LP Conversion Kit
600-083 Receptacle/Speed Control Assembly
942-085 5" Restrictor Plate
DSL-HHS Horizontal Vent Heat Shield
500-DSL 3 pc. Grill Assembly
DSL-FPS Firepro Standoff

INSTALLATION OVERVIEW

NOTE The qualified installer should follow the procedure best suited for the installation.
1. Frame an opening for fireplace, allowing for vent installation and type of installation (corner or flat wall application).
2. If masonry (optional) is used, prepare foundation for the masonry load. A lintel is required to support the added weight above fireplace.
3. Attach stand-off brackets and nailing flanges to fireplace.
4. Insert fireplace into framing.
5. Install hearth (if applicable).
6. Complete gas line installation.
7. Complete electrical hook-up. Install any standard or optional electrical components at this time.
8. Complete venting installation.
9. Secure fireplace to flooring through holes in outer box bottom and to framing with nailing flanges. Verify all clearances at this point.
10. Install facing material, mantel or cabinetry, allowing room for optional full face doors, if applicable.
11. Install optional refractory.
12. Install logs.
13. Install grills and optional decorative doors / faces.
14.
Verify proper operation of fireplace and all components.

PLACEMENT CLEARANCE REQUIREMENTS

This fireplace must be installed on a level surface capable of supporting fireplace and venting.
Fireplace must be placed directly on wood or non-combustible surface (not linoleum or carpet) extending entire depth and width of fireplace.
Due to high surface temperatures, fireplace should be located out of traffic and away from furniture and draperies.
This fireplace may be installed in a bedroom.
Please be aware of the large amount of heat this fireplace will produce when determining a location.
SPECIFICATIONS
DESCRIPTION
#DSL-36-IPI COMPONENTS LIST
PART NUMBER
DSL-600-IPI
700-203
DSL-135
TMT-028-IPI
DSL-500
DSL-057T
OCK-A53L-I-DSL-PSE
700-208
600-002
942-085
DSL-HHS
500-DSL
DSL-FPS
7
DESCRIPTION
Control Board Assembly
Manual Gas Shut-off Valve
Burner / Log Grate Assembly
IPI Fan Kit
Log Package
Glass Frame Assembly
LP Conversion Kit
Remote Control
Double Receptacle Assembly
5" Restrictor Plate
Horizontal Vent Heat Shield
3 pc. Grill Assembly
Firepro Standoff