Hp-Gl/2 Emulation; Hp-Gl/2 Parameter Settings - Fuji Xerox Document Centre 336 series User Manual

HP-GL/2 Emulation

This section shows the parameter settings and explains the major features specific to
HP-GL/2 emulation.

HP-GL/2 Parameter Settings

The following tables show the basic and advanced parameter settings for HP-GL/2
emulation. For information on how to change parameter values, refer to HP-GL/2
Emulation in the Machine Status chapter on page 258.
Basic Settings
Parameter
Document Size
Paper Size
Item No.
101 99 (Default): Auto
100: Paper
0: A0
1: A1
2: A2
3: A3
4: A4
5: A5
10: B0
11: B1
12: B2
13: B3
14: B4
15: B5
Sets the document size created by a PC client. When Auto (99)
is specified, the document size is determined based on the
Scaling Mode setting (the item number 160).
102 99: Auto
101 (Default): A Size
3: A3
4: A4
5: A5
14: B4
15: B5
Sets the paper size to be printed. This can be set if the paper
tray setting is either "Auto" or "Tray 5 (Manual Feed)". In
addition, settings can only be made for cut paper. When Auto
(99) is specified, the paper size is determined based on the
Scaling Mode setting (the item number 160).
HP-GL/2 Emulation
Value
335