Kubota RTV 900 Workshop Manual page 26

RTV900, WSM
Muffler Cover, Muffler, Hydraulic Oil Tank, Hydraulic Cylinder
and Hydraulic Control Valve
1. Remove the muffler cover (1) and muffler (2).
2. Disconnect the quick couplers from hydraulic control valve.
3. Remove the cotter pin and clevis pin, then remove the hydraulic
cylinder (3).
4. Disconnect the suction hose (4) and return hose (5), then remove
the hydraulic oil tank (6).
5. Disconnect the cables (7) for hydraulic control valve.
6. Disconnect the delivery hose (8) and remove the hydraulic
control valve (10).
(When reassembling)
• When connecting the hydraulic control valve (10) cable to
hydraulic control valve lever (9), be sure to adjust the length of
cables (7).
NOTE
• The muffler shall be assembled in the following order:
1. To secure the muffler (2) to the exhaust manifold, put four
spring lock washers on studs and start a nut (11) on each
stud. Screw each nut 2 to 3 threads on studs.
2. To secure muffler (2) to muffler stay (13), start a sems bolt
(bolt with plane washer and spring lock washer. Turn sems
bolt 2 to 3 threads into underside of muffler stay (13) and the
muffler (2).
3. Tighten nuts (11) that fasten the muffler (2) to the exhaust
manifold (12).
4. Tighten the sems bolt that fasten the underside of the
muffler (2) to the muffler stay (13) (On this occasion, check
the gap between the undersize of the muffler and its stay.
When there is a large gap between them, lift the stay and
assemble the muffler. And keep them to such a position to
fasten the muffler stay.).
5. Tighten the bolts (15) that fasten muffler stay (13) to
transmission.
Muffler mounting nut
Muffler mounting bolt
Tightening torque
(Sems bolt)
Muffler stay mounting bolt
(1) Muffler Cover
(2) Muffler
(3) Hydraulic Cylinder
(4) Suction Hose
(5) Return Hose
(6) Hydraulic Oil Tank
(7) Control Valve Cable
(8) Delivery Hose
9-S4
NEW TRANSMISSION
23.6 to 27.4 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 ft-lbs
48.1 to 55.8 N·m
4.9 to 5.7 kgf·m
35.5 to 41.2 ft-lbs
17.7 to 20.5 N·m
1.8 to 2.1 kgf·m
13.1 to 15.1 ft-lbs
(9) Hydraulic Control Valve Lever
(10) Hydraulic Control Valve
(11) Nut
(12) Exhaust Manifold
(13) Muffler Stay
(14) Sems Bolt
(15) Bolt
W1017697
KiSC issued 04, 2006 A